User Manual

Table Of Contents

CA: display the melody

Display when VOX function turns on

Keypad locked

Talk Confirm tone

Attaching the Belt Clip (optional accessories)

1.Align the belt clip post with the hole in the back of the interphone

2.Genetly push until the clip clicks into place

Removing the Belt Clip

1. Push down on the release tab at the top of the belt clip to release the catch

2. Pull the belt clip away from the back of the radio.

Turning Your Radio On And Off

To turn on, press and hold.

Button until the radio chirps and the display all feature

icons that your radio has available for a brief period. The display will show the channel 1 -

22 and interference eliminator code 0 - 38. To turn off, press and hold.

Button until the

display blank.

Setting the volume

When power up, Press

or button to adjust your volume to a comfortable listening

level. When setting volume, there is a “V” in the display.

Talking and Listening

1 To communicate all radios in your group must be set to the same channel and interference

Eliminator Code.

2.To talk, press and hold . Hold the radio 2 to 3 inches away from your mouth when

talking.

3.When you finish talking, release (press to talk, release to listen)

Checking the Channel Before Transmitting

Your radio has multiple channels shared on a “take turns” basis. For uninterrupted

communication, do not talk on a channel if someone else is currently talking on it. To check

for activity on a channel before you talk, press and hold . If you hear static, the channel is

clear to use..

Setting a channel

The channel is the frequency your radio uses to transmit. Your radio has 22 channels.

Channel 1-7 and 15 –22 are 1 watt. Channels 8 – 15 are 0.5 watt.

The content of this document is Giant Electronics Ltd.'s intellectual property and is the property of Giant. It is to be

treated as strictly confidential and is not to be disclosed, reproduced, or used except as authorized in writing by Giant

Electronics Ltd. In connection with the manufacture, maintenance and use of the Giant equipment to which it pertains.

Page 7 of 12