User Manual

code combinations.
To set code for a channels.
1.press
until the code starts to flash.
2.press
or to select the code
3.press to save the code setting
You can set a different code for each channel using this procedure.
Note: You must set the interference Eliminator Code to on a radio that uses interference
Eliminator Codes to communicate with other radios that do not have interference Eliminator
Codes.
Push to Talk Timeout Timer
To prevent accidental transmissions and save battery life, the radio emits a continuous
warning tone and stops transmitting if you press
for 60 continuous seconds.
Locking the Keypad
To avoid accidentally changing your radio settings, press and hold for 3 seconds of until
displays. You can turn the radio on and off, receive, transmit, send a call tone, and monitor
channels. All other functions are locked.
To unlock the radio, press and hold
for 3 seconds or until is no longer displayed.
Alert
Channel Busy Indicator
When a Channel is busy, the LED flashes twice per second.
Setting and Transmitting Call Tone
Your radio can transmit different call tones to other radios in your group so you can alert
them that you want to talk.
To set a call tone:
1.With the radio on, press
3 times. The current call tone setting flashes and CA displays.
2.press
or to change and hear the call tone.
3.press or to set the new call tone.
To transmit your call tone to other radios set to the same channel and interference Eliminator
Code as your radio, press
.
Note:
This radio has 10 call tones.
Setting the call tone to 0 disables the call tone feature.
Transmitting a talk confirmation Tone
You can set your radio to transmit a unique tone when you finish transmitting. It is like
saying Roger or over to let others know you are finished talking.
1.To turn talk confirmation on, Press and hold
while you turn the radio on. When you
release after transmitting, your confirmation tone transmits and displays.
3. To turn talk confirmation tone off, turn your radio off and then back on while pressing and
holding.
.
The content of this document is Giant Electronics Ltd.'s intellectual property and is the property of Giant. It is to be
treated as strictly confidential and is not to be disclosed, reproduced, or used except as authorized in writing by Giant
Electronics Ltd. In connection with the manufacture, maintenance and use of the Giant equipment to which it pertains.
Copyright @Giant Electronics Ltd. All rights reserved.
Page 9 of 12