User Manual Model: T8260A
SAFETY INFORMATION Transmit and Receive Procedure Your two-way radio contains a transmitter and a receiver. To control your exposure and ensure compliance with the general population/uncontrolled environment exposure limits, do not transmit more than 50% of the time. Transmitting 50% of the time, or less, is important because the radio generates measurable RF energy exposure only when transmitting (in terms of measuring standards compliance).
YOUR NEW RADIO The two-way radios operate on FRS/GMRS 462/467 frequencies, and can be used in USA & Canada where the frequencies are authorized, subject to applicable regulations. Turning Your Radio On And Off Turn Volume button clockwise to turn your radio on. The radio chirps and the display will show all feature icons that your radio has available for a brief period. The display will show the channel 1 - 22 and interference eliminator code 0 - 38. Turn volume button anticlockwise to turn your radio off.
• To stop scanning, briefly press and release “MON” button. Scan Advance If scan stops on a channel that you don’t want to listen to, briefly press “+” or “-“ button to resume scanning for the next active channel. Nuisance Delete If scan continuously stops on an undesired channel, press and hold ”+” or “-“ button for least 3 seconds, then release. This will temporarily remove the undesired channel from the scan list. To restore the channel to the scan list, turn the radio off and then on.
Stop Watch This radio have a additional function that is Stop watch. To Start the stop watch • With the radio on, press “MENU” button until "00" “00” appears in the display. • Press.”+” stop watch will start running . • When stop watch is running, pressing “+” will change it to pause state, and displays the time that has passed, but the stop watch doesn’t stop working, it still runs in the background.
