User Guide

See giantloopmoto.com/warranty for complete warranty details.
L
I
M
I
T
E
D
L
I
F
E
T
I
M
E
WARRANTY
* Tracker Packer™ is a Giant Loop
®
brand name. Spot GEN3
®
is a trademark of Spot LLC
®
.
www.giantloopmoto.com | 888-358-8347 | Bend, Oregon USA
GO LIGHT. GO FAST. GO FAR.
0419
Wrap the strap over
the top of the Tracker
Packer and under the
webbing loop on the
back side.
Tightly sandwich the
single-sided hook-
and-loop strap inside
the double-sided
strap.
Thread the hook-
and-loop strap
through the lower
slot on the Spot
Gen 3.
Thread the hook-and-
loop strap through
the upper slot on the
device. The strap will
be on the back side of
the device.
USING THE ARM BAND:
2
1
3
5
4
6
Insert the included clip into the loop end of the
Tracker Packer and snap the metal clasp to close.
Sandwich the single-layer
end of the arm band into
the double-sided hook-
and-loop strap of the
Tracker Packer.
Loop the double-layer end
through the clip and pull
tight to secure.
Trim the single-layer end
of the arm band to the
length needed.
The Tracker Packer is typically
attached to a backpack strap.
Tightly sandwich the double-
sided hook-and-loop strap
around the single-sided strap.
Girth hitch the tether to
the Spot Gen 3 and use
it to tether the device to
your backpack or apparel.
The Tracker Packer can be adapted to wear around
your upper arm or around your leg above the boot.
Single-layer endDouble-layer end
2
1
3