Users Manual

NET:
The slave network online indicator light.Only this light on
shows that the slave is connected to the host.(The test
page of the slave can be printed by pressing the Print on
the slave for 4 seconds.To show whether the network is
smooth)
Host OLED
interface
Host: (separately out to write operation instructions)
1. display time and ticket information scroll display (the
content of the scroll bar can be changed to the serial port
location address or the desired settlement system name)
2. login password with an initial password of "0000"
3. Home feature Selection:
1. daily settlement report, 2. Time setting, 3. Login
password equipment, 4. restore the factory settings (input
administrator password to restore the factory)
From the machine:
1. slave ID information and baud rate
2. last settlement and master worker settlement
Charilling by
machine pulse
input mode
Support every 50ms positive billing, receiving 2P pulse
output on the game console to the Pusle-In port.Note
positive and negative poles.
(The test can be short-connected via the red and black 2P
interface for a $1 analo
g
in
p
ut
)
Enter illing
from serial
port
Supports signal acquisition of 2400 and pulse input type of
9600,115200 serial port port rate.Knowing what the port
rate communication is on the game console, you will set the
slave code to the same communication mode.The port rate
follower address is displayed on the corresponding OLCD
screen.
Real-time
printin
g
Support the host printing of bills in real time when settling
from the computer
Day-to-day
statements
The Host supports the printing of daily knot reports,
Report from
machine
Support single input, summarize with the flow of the day.
After 12 PM, the main opportunity will clear the data of the
p
revious da
y
and restart the calculation.
PC end
modification
Content
Through serial port software, serial port port rate: 115200
hardware drive: CH340e .
Win10 not need to installed drive.
1. supports PC modification modify the standby scroll bar
2. Modification Time
3. modify the login password (if the host's administrator
password does not remember, can only be modified through
the PC side)