Users Manual

1.4.7 In the factory setting interface, enter the administrator password after
entering the set button. The main purpose is to clean up all the data, login password
to the original 0000, and the address to the original ticket settlement
system.(Restore factory can also be sent through the computer serial command to
reset) the administrator password is correct or wrong will be prompted.
1.4.8 All operating interfaces, if not at the main interface, return to the main
interface after 30 seconds.
1.5 Description of OLCD screen
1.5.1 LCD interactive interface description: after turning on, enter the first main
interface and display the main equipment address. If the network is successful, the
code of D code will not be displayed. After the network is successful, the
corresponding equipment network to which network host will be displayed.The first
two bits are port rate: there are 3 choices 2400,9600,115200, the back 4 bits are
address code, the address of the starting ID address is 01 to 16 represents code
selection, dialing need to be effective.
1.5.2 A short press of print shows the current player input and the summary of the
day.