User's Manual
Table Of Contents
- Connecting the Base Station and Power Plug
- Connecting the Charging Station #
- Install and Charge the Batteries
- Place the handset in the base station to charge for 16 hours prior for first use. If you don’t properly charge the phone, battery performance will be compromised.
- Using the Handset Telephone
- Selecting the Language
- Making Internal Calls
- Making External Calls
- Taking Calls
- Redialling
- The phone stores the last ten numbers dialled in the redial memory.
- Press key; the last call number dialled is displayed.
- Press or key to search the required number in the redial memory list.
- Press key to carry out the conversation.
- Press key to end the call.
- Note: 1. If the number is longer than 16 digits, only the last 14 digits will be shown.
- 2. Name is displayed instead if number is matched with phone book memory.
- Dialling from the Phone Book
- Call Log Operations
- Browse, Call Back, Delete, Store
- Press to enter CALL LOG memory.
- Browse: Press or key to browse through the CALL LOG memory.
- Call Back: press or key to call back.
- Or
- Press to select DELETE? by using or key.
- Or
- Press to select DELETE ALL? by using or key.
- Or
- Store: Press to enter CALL LOG menu.
- Press to select SAVE NUMBER by using or key.
- Press key to save the entry in phone book memory.
- Press 0-9 to add digits in front of CLI number.
- Press to remove entry or leftmost digit.
- Press or key can recover the original CLI number.
- Example:
- Holding Calls /Forwarding Calls
- Intercom Call Transfer
- Teleconference
- Press and enter the number of the corresponding handset (e.g.2) which will join the teleconference.
- The external caller is kept on hold. As soon as handset 2 takes the call, the internal connection is established.
- Press the key any time, and then press or key scroll to “CONFERENCE”.
- Press will start the 3 way conference.
- Press again, “SINGLE CALL” will show and then press will end the 3 way conference and return to intercom call.
- Note: The handset which initiates the intercom call can switch between the phone call and the intercom handset by pressing key and then press or key to select “SWITCH”.
- By pressing the key, any of the handsets can quit from the teleconference and the other handset continues with the external call.
- Handset Speaker Phone
- Changing the Receiver Volume
- Muting the Ringer volume
- Muting the Microphone
- Paging the Handset
- Entering a Dialling Pause (P)
- Switching the Key Lock On/Off
- Incoming calls can still be received when key locked.
- Press key to access phone book memory.
- Press key to access phone book menu.
- Press or key to select ADD NEW and press key.
- Enter number (max. 24 digits) and press key when finished.
- Enter name (max. 15 characters) and press key when finished.
- Press key to access phone book memory.
- Edit Entry: Press or key to scroll.
- Press key to select a desired entry, and then press or to select the submenu EDIT.
- Press to start Number edition and press key again to start Name edition.
- Press key to confirm.
- Note: Press key to delete any incorrect input.
- Or
- Delete: Press or key to scroll.
- Press key to select a desired entry, and then press or to select the submenu DELETE？.
- Press key to delete the entry.
- Press key again to confirm.
- Changing the Handset Ringer Melody
- Changing the Ringing Volume
- Activating/Deactivating Automatic Call Answering
- Setting the Alarm
- Entering/Changing Handset Name
- Changing the Base Ringer Melody (external / internal)
- Changing the Ringing Volume
- Changing Base PIN Code
- Changing the Dialling Mode
- Changing the Flash Time
- VMWI
- Setting the Area Code
- Reset Base
- Date / Time
- Registration
- Registering Additional Handsets
- Remove a Handset from the Base
- Press key until the REGISTRATION menu appears and press key.
- Press or key to select the submenu REMOVE HANDSET and press key.
- Enter the PIN (factory setting =0000) and press key
- If necessary, use or key to select the handset and press key. REMOVE HANDSET? will show on the display.
- Press key to confirm.
- For guidance only, depends on initial battery charge.
- Consumer Information
1- CALL LOG
2- PHONE BOOK
ADD NEW ENTER NUMBER ENTER NAME
SELECT
EDIT
DELETE? CONFIRM?
3- SETUP HS
RING MELODY MELODY 1-8
RING VOLUME [-----]
TONES LOW BATTERY ON
OFF
NO COVERAGE ON
OFF
KEY TONE ON
OFF
AUTO TALK ON
OFF
ALARM ON TIME HH:MM
OFF
HANDSET NAME
LANGUAGE ENGLISH
FRANÇAIS
ESPAÑOL
CONTRAST [-----]
RESET RESET?
4- SETUP BS
RING MELODY MELODY 1-5
RING VOLUME [------]
CHANGE PIN ENTER PIN NEW PIN REPEAT PIN
DIAL MODE TONE
PULSE
FLASH TIME 100ms/120ms/250ms/270ms/300ms/370ms/600ms/800ms
VMWI VMWI OFF?
AREA CODE
ENTER LAC
RESET ENTER PIN RESET?
5- DATE/TIME
YEAR 20xx DATE DD/MM TIME HH:MM
6- REGISTRATION
REGISTER ENTER PIN
REMOVE HANDSET ENTER PIN
HANDSET 1..4
Handset and Base Layouts
– 5 –