User's Manual
Table Of Contents
- Important Safety Instructions
- Safety Instructions for Handset Battery Pack
- Handset and Base Layouts
- Handset and Charger
- LCD Display
- Getting Started
- Features
- Basic Operation
- Answering Calls
- Display for incoming calls:
- Display during an active call
- Display after a call is terminated
- Using the Intercom
- Making External Calls
- Ending your outgoing call
- Teleconference and Intercom Call Transferring
- Call Waiting
- Call Waiting ID
- Redial
- _
- Muting the Handset Microphone
- Page
- Using the ‘Hands-Free’ Handset Speakerphone
- Pay N’ Talk Service (The LDS Key)
- Handset Menu and Programming
- Call Log (Caller ID)
- CALLER ID Prefix
- Smart Dialing
- Phone Book
- Volume
- Ring Volume
- Ring Pattern
- Auto talk
- Low Battery alert Tone
- No coverage alert Tone
- Key Tone
- Key Lock
- Handset Naming
- Language
- LCD Contrast
- Reset Handset
- Default Handset settings
- Base PIN Code
- Base Dial Mode
- Base Flash Timing
- Base CID Prefix
- Base Message Waiting LED
- Resetting the Base
- Default Base setting
- Base Unit Status Indication
- Display Messages
- Registering Your Handsets (Adding Handsets to Your System)
- De-registering Your Handsets (Removing Handsets from Your System)
- Consumer Information
- Limited Warranty
4. During the call, you can press Talk/Spk to toggle the Speakerphone On/Off.
5. The maximum length of the pre-dialing number is 24 digits.
Making Calls – Post-Dialing
1. Press Talk/Spk, and listen for dial tone.
2. Enter the phone number and it will dial out:
9876543210
00:00:01
The display shows the digits of the number as they are entered. The first digit is entered in the left-hand side of the
first line.
3. During the call, you can press Talk/Spk to toggle Speakerphone On/Off.
Ending your outgoing call
Your outgoing call is terminated by either pressing:
• OFF
• or by placing the Handset in the charger.
After terminating your call, the Call Timer stops running. The Handset returns to the idle screen after 2 seconds. If
the Handset is put in the cradle, it returns to the idle screen immediately.
NOTE:
If the Handset connection is lost, (e.g. the Handset is out of range of the Base for at least 5 seconds), the Base Unit
automatically goes on-hook (terminates the call), and the Handset will display ‘Searching’.
Teleconference and Intercom Call Transferring
After having received an external call, it is possible to include a second handset in the conversation (three-way
conference)
1. Press INT and enter the number of the corresponding handset (e.g.2) that will receive the transfer of the call.
2. The external caller is kept on hold. As soon as handset 2 takes the call, press the OFF key to transfer the call
to handset 2.
Note: the handset which initiates the intercom call can switch between the phone call and the intercom handset
by pressing PROG//OK key twice to select the ‘Switching’. (When the intercom is connecting, the far end user
will hear a beep tone)
Or
3. In order to join a Teleconference, simply press the Talk/Spk or LDS button of a handset not currently on the
external call and the teleconference will be activated automatically. (A beep tone will be heard and
“Conference” will be displayed on the LCD.)
4. By pressing the OFF key, any of the handsets can be disconnected from the teleconference and the other
handset continues with the external call.
Call Waiting
When you receive a Call Waiting alert tone in the earpiece (or Handset Speakerphone), the ‘waiting’ call can be
answered by pressing the FLASH key. If the ‘waiting’ call is not answered, the display will return to normal active
call after 20 seconds.
Call Waiting ID
When the Handset is in use, and you receive Caller ID information, the Redial and call log menu will be available
by pressing “PROG//OK” button.
Use the ▲ and ▼ scroll keys to highlight the desired action.
Confirm the action by pressing PROG//OK.
The Handset then returns to the normal call display.
For more information on Call Waiting options, contact your local service provider.
Redial
The last 10 numbers called are stored in the redial memory.
With the Handset idle (on hook), press RDL and Use the ▲ and ▼ scroll keys to find the desired phone number.
12