User's Manual

DR A FT
Page 50
Safety Information
IMPORTANT SAFETY AND OPERATIONAL INFORMATION
Please read the following safety and operational instructions before using your Bluetooth® headset.
Please keep these instructions for your reference. When using your Bluetooth headset, these basic
safety precautions and warnings should be followed to reduce the risk of fire, electric shock, injury to
persons and damage to property.
This symbol
identifies and alerts the user to the presence of important safety warnings.
WARNINGS
CHILDREN. Never allow children to play with the product—small parts may be a choking hazard.
Check local laws regarding use of a mobile phone and headset while driving.
If you use the headset while driving, ensure your attention and focus remain on driving safely.
Observe all signs that require an electrical device or RF radio product to be switched off in
designated areas, such as hospitals, blasting areas, potentially explosive atmospheres, and aircraft.
On aircraft, obey the airline regulations for use of wireless equipment.
To reduce the risk of electric shock, explosion or fire use only the supplied charger or Class 2 AC
adapter to charge the headset. Ensure that the voltage rating (e.g. 120v, 60 Hz) corresponds to the
power supply you intend to use.
Do not disassemble the AC adapter as this may expose you to dangerous voltages or other risks.
Incorrect reassembly can cause electric shock or fire when the product is subsequently used.
Do not insert anything into the product because this may cause damage to the internal components
or cause injury to you.
Avoid contact with liquids. Do not locate this product near water, for example, near a bathtub, or
sink, in a wet basement, or near a swimming pool.
Discontinue use of product and contact Plantronics if the product overheats, has a damaged cord
or plug, if the product has been dropped or damaged, or if the product has come into contact with
liquids.
This product should never be placed over or near a heat register and should not be placed in a
built-in installation unless proper ventilation is provided.
Exposure to high volume sound levels may damage your hearing. Although there is no single
volume setting that is appropriate for everyone, you should always use your headset or headphones
with the volume set at moderate levels and avoid prolonged exposure to high volume sound levels.
The louder the volume, the less time is required before your hearing could be affected. You may
experience different sound levels when using your headset or headphones with different devices.
The device you use and its settings affect the level of sound you hear. If you experience hearing
discomfort, you should stop listening to the device through your headset or headphones. To protect
your hearing, some hearing experts suggest that you:
Set the volume control in a low position before putting the headset or headphones on your ears.
Limit the amount of time you use headsets or headphones at high volume.
Avoid turning up the volume to block out noisy surroundings.
Turn the volume down if the sound from the headset or headphones prevents you from hearing
people speaking near you.
See
www.plantronics.com/healthandsafety for more information on headsets and hearing.
BATTERY WARNINGS
To reduce the risk of fire or injury to persons, read and follow these instructions.
Charge the headset according to the instructions supplied with the unit.
Do not expose the battery to high temperatures.
Do not puncture or otherwise damage the battery. The cell contains corrosive materials which may
damage eyes and skin and may be toxic if swallowed.
Do not short-circuit the battery, as this may result in a sudden rise in temperature.
Do not incinerate the battery.
Never put batteries in mouth. If swallowed, contact your physician or local poison control center.
Dispose or recycle the battery according to local and regional regulatory requirements.
•
•
•
•
•
•
•
•
•
•
•
•
1.
2.
3.
4.
•
•
•
•
•
•
•