User's Manual

- Page 28 -
5. From the WAN Config choose the type of connection provided by your ISP:
DHCP, Static IP, or PPPoE.
6. Follow the appropriate step below for your connection type
a. For DHCP connections:
- Select DHCP.
- click on Apply and go to Step 7.
b. For Static IP
- Select Static
- Enter the IP address, Subnet Mask, Gateway, Primary DNS, and Secondary
DNS provided by your ISP.
- Click on Apply and go to Step 7.
c. For PPPoE
- Select PPPoE.
- Enter the PPP User Name and PPP Password provided by your ISP.
- Click on Apply and go to Step 7.
7. If you haven’t already done so, click Apply to save the settings you have made.
8. Click on System Tools and then System Save, the System Save menu will appear.
Press Save to save the settings you have made.
9. Reset the power to your cable or DSL modem.
10. Reset the power to your E6501S.
11. Finally, you will need to shut down and restart all of the PCs (and Router if
present) that are connected to the E6501S.