BZ22439 Cover –1–
IMPORTANT SAFETY INSTRUCTIONS BEFORE USING YOUR TELEPHONE EQUIPMENT, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK AND INJURY TO PERSONS, INCLUDING THE FOLLOWING 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. Read and understand all instructions. Follow all warnings and instructions marked on the product. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
WARNING: TO PREVENT FIRE OR ELECTRICAL SHOCK HAZARD, DO NOT EXPOSE THIS PROCUCT TO RAIN OR MOISTURE. THE CAUTION: TO EXCLAMATION REDUCE THE RISK WITHIN THE OF ELECTRICAL TRIANGLE IS SHOCK, DO NOT WARNING SIGN REMOVE COVER ALERTING YOU (OR BACK). NO OF IMPORTANT USER INSTRUCTIONS SERVICEABLE ACCOMPANYING PARTS INSIDE. THE PRODUCT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The base station and charging station have no power switch. Ensure that a Mains power outlet is close by and that the power plug is easy to access. Check that the voltage specified on the power plug corresponds with that supplied by local power network. Connecting the Charging Station Insert the power plug in the socket on the rear side of the charging station. Insert the power plug at the other end in the power outlet. The charging station is now ready to operate.
Handset and Base Layouts MENU/▼ /▲ INT / OK C/ / Menu / Down key CID / Up key INT / OK key Cancel / Mute key Speaker phone key Redial / Pause key External call key. R/ */ # Flash key / Phone book key Asterisk key / Lock key Hash key Page key In-use LED: The In-use LED will be steadily on during off-hook. During the period of incoming call, the In-use LED will also follow the ring cadence to go on or off. When registering, it will flash as a special cadence.
LCD Display Battery icon Phone icon External call icon Internal call icon CLI icon ▲/▼ No ring icon Mute icon Key lock icon Aerial icon Up / Down arrow Getting Started Install and Charge the Batteries Insert two pieces AAA batteries in the compartment, ensuring correct polarity and close the compartment. Place the handset in the base station to charge for 16 hours prior for first use. If you don’t properly charge the phone, battery performance will be compromised.
handset is registered on the base station. Press “INT/OK” key. Press the number of the required handset (1-4). Carry out the conversation. Press key to end the call. Making External Calls Direct dialing key and wait for a dialing tone. Press Dial the telephone number and complete the call. Press key to end the call. On hook dialing Dial the telephone number (delete any incorrect entries by pressing “C” key). Press key to carry out the conversation. Press key to end the call.
Note: How to store entries in the phone book is explained in the chapter “Phone Book”. Call Log Operations IMPORTANT: To use the “Call Log” function, you must subscribe to your network operator’s Caller Line Identification (CLI) service. Browse, Call Back, Delete, Save If calls have been received in your absence, these are stored in the CALL LOG memory when your telephone service has enabled this function. The number of calls appears in the display.
The external caller is kept on hold. As soon as the other handset takes the call, press and hold “#” key 2 seconds to activate the teleconference. key, any of the handsets quit from the By pressing teleconference and the other handset continues with the external call. Alternatively, you can use another handset to join the conference by pressing key after the external call is established. Handset Speaker Phone Press key to activate or deactivate the handset speaker.
Enter the name (press “C” key to delete any incorrect character) and press “INT/OK” key when finished. Enter the number (press “C” key to delete any incorrect digit) and press “INT/OK” key when finished. Delete Entries Press key until the PHONE BOOK menu appears and press “INT/OK” key. Press key. or key to select DELETE and press “INT/OK” or key to select the desired entry. Press Press “INT/OK” key to delete the entry. Press “C” key to return to the phone book menu.
Tones Setting Press key as often as necessary until the HANDSET menu appears and press “INT/OK” key. Press key. or key to select TONES and press “INT/OK” or key to select the desired tone (key tone, Press confirmation tone, low battery tone and out of range tone) and press “INT/OK” key. or key to switch the desired tone on or off and Press press “INT/OK” key to confirm. Call Timer Press key as often as necessary until the HANDSET menu appears and press “INT/OK” key. Press key.
Barring Calls The following options are available for selection for barring calls: Option Description DISABLE All telephone calls are possible. EXTERNAL All external calls are barred. NUMBER Define a number which should be barred, e.g. 0190 Press key until the BASE menu appears and press “INT/OK” key. or key to select the submenu CALL BAR and Press press “INT/OK” key. or key to select the handset which should be Use barred and press “INT/OK” key. or key to select an option and press “INT/OK” Use key.
Open Field Range*: Indoor Range*: Handset Operating Time: (average values**) Handset Weight: AC/DC Adapter: AC/DC Adapter: Handset charger) (for Rechargeable Battery: Operating Temperature: * ** Typical 300m Typical 50m Approx. 6 hours talk time Approx. 70 hours standby Approx. 115g U060035D12 Input: 230 V AC, 50Hz Output: 6 V DC, 350mA U060015D12 Input: 230V AC,50Hz Output: 6 V DC, 150mA SN-AAA60HJ or equivalent (Ni-MH, 1.2V, 600mAh) 0 to 45 ° C Value may vary according to environment.
Relocate the base. Charge the battery. Make sure base is not plugged into an electrical outlet with another household appliance. Unit beeps Place handset in base cradle for 20 seconds reset the security code. If that doesn’t work, charge the battery for 12 hours. Clean the charging contacts on the handset and base with a soft cloth or an eraser. See solutions for “No dial tone”. Replace the battery.
