User's Manual

– 4 –
The base station and charging station have no power
switch. Ensure that a Mains power outlet is close by and
that the power plug is easy to access. Check that the
voltage specified on the power plug corresponds with that
supplied by local power network.
Connecting the Charging Station
Insert the power plug in the socket on the rear side of the charging
station. Insert the power plug at the other end in the power outlet. The
charging station is now ready to operate.
CAUTION:
Use only the ALCATEL (Output rated 6V
350mA) power supply that came with this
unit. Using other power supplies may
damage the unit.