Triplex Ceramic Plunger Pump Operating Instructions/ Manual Model GP6124 & GP6128 Updated 3/98 Contents: Installation Instructions: Pump Specs.(GP6124): Exploded View: Parts List / Kits: Pump Specs.
INSTALLATION INSTRUCTIONS Installation of the Giant Industries, Inc., pump is not a complicated procedure, but there are some basic steps common to all pumps. The following information is to be considered as a general outline for installation. If you have unique requirements, please contact Giant Industries, Inc. or your local distributor for assistance. 4. Use of a dampener is necessary to minimize pulsation at drive elements, plumbing, connections, and other system areas.
Specifications Model GP6124 Volume ........................................................................................................ Up to 12.8 GPM Discharge Pressure .................................................................................... Up to 5800 PSI Speed .......................................................................................................... Up to 800 RPM Inlet Pressure ..............................................................................................
Exploded View - GP6124 & GP6128 4
GP6124 & GP6128 PARTS LIST ITEM 1 2 4 5 8 9 10 11 12 13 14 15 16 20 20A 21 22 23 24 25 28 30 30A 30B 30C 31 32 32A 33 33A 33B 34 36 36A 37 37 38 39 PART 13200 13000 13201 13202 13203 01009 13133 13134 07109 07182 13204 13205 08055 13206 13207 13208 13209 08213 13211 13212 13213 13214 07225-0100 13136 07622 07623 06118 13215 13216 07721 13217 13218 13219 07125 13397 13220 07131 07755 DESCRIPTION Crankcase Oil Filler Plug Assembly Crankcase Cover O-Ring, Crankcase Cover Oil Dip Stick O-Ring, Dip Stick Hexag
Specifications Model GP6128 Volume ........................................................................................................ Up to 18.0 GPM Discharge Pressure .................................................................................... Up to 4000 PSI Speed .......................................................................................................... Up to 800 RPM Inlet Pressure ..............................................................................................
REPAIR INSTRUCTION - GP6124 & GP6128 To Check Valves Loosen plugs (56) and take out complete valve (51) with a slide hammer (provided with pump). With a bent piece of wire, take out o-rings (56A) located between the suction and discharge valves. To dismantle the valves, carefully tap the valve plate (51B) with a bolt until the valve seat (51A) is pushed out of the spacer pipe (51D). Check the sealing surfaces and replace all worn parts. Check the o-rings.
GP6124 & GP6128 DIMENSIONS GIANT INDUSTRIES LIMITED WARRANTY Giant Industries, Inc. pumps and accessories are warranted by the manufacturer to be free from defects in workmanship and material as follows: 1. For portable pressure washers and car wash applications, the discharge manifolds will never fail, period. If they ever fail, we will replace them free of charge.