Installation Guide

METAL ROOF PANEL
HANDLING & STORAGE
Store off the ground, inside in a well ventilated, dry location. Block the pallet on an angle to permit drainage. For temporary
outside storage, block pallet on a angle to permit drainage and cover with a breatheable tarp (do not use plastic).
CRITICAL WARRANTY INFORMATION
Failure to comply with these storage procedures relieves the manufacturer of responsibility for any resultant damage to, or
deterioration of, the product and voids all warranties. There is no implied warranty of merchantability or fitness for purpose.
Avoid contact with any corrosive
materials or dissimilar metals.
CAUTION! Sharp edges!
Use gloves to prevent injury.
This product is not recommended for
direct contact with treated lumber.
Remove metal shavings after drilling
or cutting, to avoid rust stains.
Do not use a panel saw for cuts.
Cutting should be done with
“scissor” cutting tools.
Do not write directly on Metal
Roofing panels or trim.
gibraltarbuildingproducts.com