Instructions / Assembly

1. Start with the bottom course of siding. Carefully slide the first
corner up and under the second course. Continue until the
bottom wrap around lip is fully fitted to the bottom courses.
2. Continue working from the bottom up. While driving the nails
pay attention to the vertical and horizontal alignment of the siding
corner. Trim the last corner to fit.
Nail into the siding using a
galvanized nail with a head of
at least 3/16 in. and a length
sufficient to penetrate 1in.
into the corner studs.
Corner Stud
Siding CornerNail
Siding
These installation guidelines are for use with typical or standard
applications. It is always recommended to seek advice from a licensed
professional, and to check with your local building inspector or building
permit office for approvals and possible variations that may apply.
INSTALLATION GUIDELINES
SIDING CORNERS
#2108XL
#2108XL-W
www.gibraltarbuildingproducts.com