Instructions / Assembly
5V CRIMP
INSTALLATION GUIDELINES
EAVE FLASHING
Eave Flashing has very sharp edges. Use gloves to prevent injury. This
product is not recommended for direct contact
with treated lumber.
Working above grade is inherently dangerous, be sure that
proper fall protection measures are in place.
When working with power tools and sheet metal, gloves and
eye protection are absolutely required.
These basic installation guidelines are for use with typical or standard
applications. It is always recommended to seek advice from a licensed
professional, and to check with your local building inspector or building
permit oce for approvals and possible variations that may apply.
#9 x 1-1/2" Screw
Closure Strip
Corrugated Panel
EF-3
EF-3 Eave Flashing is used with: Gibraltar 2 1/2" Corrugated Panels
#30 Felt min.
Butyl Sealant Tape
2"
3 ¾"
5⁄8"
½"
1" max. overhang
at eave
Galvalume Steel
EF-3
#987606