Instructions / Assembly
Table Of Contents
- SM-Rib Detail Manual 08
- Table of Contents
- Fastening Schedule
- Trims and Flashings
- Fascia Cover
- Eave Drip ED-1
- Eave Flash EF-3
- Valley PV-1/PV-2
- End Wall EW-1
- Side Wall SW-1
- Transition TF-1
- Gambrel GF-1
- Gable Rake EF-1
- Gable Rake GR-2
- High Side Eave HS-2
- Hip Cap RC-2
- Hip Cap RC-6
- Ridge Cap RC-8
- Base Drip BD-1
- Double Angle DA-1
- Drip Cap DC-1
- Track Cover TC-1
- J Channel JC-6
- Outside Corner GR-2
- Inside Corner IS-1
- Venturi Vent
- Profile Vent
- Pipe Boot
- Screws
- Accessories
- Flashing Angles
SM-Rib
35
Prole/Flashing
*
1:12 2:12 3:12 4:12 5:12 6:12 7:12 8:12 9:12 10:12 11:12 12:12
Ridge Cap 135° 170° 161° 152° 143° 135° 127° 120° 113° 106° 100° 95° 90°
Hip Cap 148° 173° 166° 160° 154° 148° 143° 138° 133° 130° 126° 123° 120°
Pre-formed Valley 136° 172° 162° 152° 144° 136° 128° 120° 114° 108° 104° 98° 90°
High Side Ridge 67° 87° 81° 76° 71° 67° 63° 60° 56° 53° 50° 47° 45°
Eave Flashing 90° 94° 99° 104° 108° 112° 116° 120° 123° 126° 128° 132° 135°
End Wall Flashing 112° 94° 99° 104° 108° 112° 116° 120° 123° 126° 128° 132° 135°
Eave Drip 90° 94° 99° 104° 108° 112° 116° 120° 123° 126° 128° 132° 135°
Gambrel Flashing
To calculate the required pitch (X°), use the following equation:
180° - ( A° - B° ) = Gambrel Flashing pitch (X°)
Transition Flashing
To calculate the required pitch (X°), use the following equation:
180° - ( A° - B° ) = Transition Flashing pitch (X°)
A
B
X°
A
B
X°
Flashing Angle Specier Chart
* Default Pitch unless otherwise specied