Instructions / Assembly

T-TOP SUB FLASHING
INSTALLATION GUIDELINES
Vent Pipes in tile roofs should require a Sub-Flashing. The metal Sub-Flashing is integrated with the underlayment, and
secured with 6 roong nails. A T-Top Primary Flashing, with a soft metal ange that conforms to the tile surface is installed,
interleaved with the tiles.
These installation guidelines are for use with typical or standard applications. It is always recommended to seek advice from a licensed professional, and to
check with your local building inspector or building permit office for approvals and possible variations that may apply.
CAUTION! Working above grade is inherently dangerous, be sure that proper fall protection measures are in place.
When working with power tools and sheet metal, gloves and eye protection are absolutely required.
#SJ7G
Minimum
6 in. Overlap
Sub-Flashing