Instructions / Assembly

APPROVED BY THE
POSTMASTER GENERAL
U. S.
MAIL
A
B
FIG. 4
FIG. 5
DPKX0055-03
MADE IN
U.S.A.
TAYLORSVILLE, MS 39168
5. MAILBOX INSTALLATION (FIG. 5)
Adjust brackets to fit mailbox base. Make sure distance “A” is equal to
distance “B” and attach brackets to arm with 2 (#10 x 1”) screws.
Attach mailbox to brackets with 4 (#10-24 x 1 1/2”) bolts and nuts.
5. LA INSTALACIÓN DE BUZÓN
(FIG. 5)
Ajustar paréntesis a la base de buzón. Asegurar distancia “A” está por valor
de la distancia “B” y adjunta paréntesis para armar con 2 (#10 x 1”) tornillos.
Adjuntar buzón a paréntesis con 4 (#10-24 x 1 1/2”) cerrojos y nueces.
FIG. 3
4. TOP POST ASSEMBLY
(FIG. 4)
Attach the top post to the bottom post assembly with the (3/8” x 3” ) dowel
screw by starting the dowel screw in both the top post and cross arm. By
twisting the top post clockwise, the dowel screw will thread into the top post
and then into the cross arm.
4. LA ASAMBLEA DE SUPERIOR POSTE
(FIG. 4)
Adjuntar los inferiores y superiores postes usa el (3/8” x 3” ) tornillo de clavija.
3. POST ASSEMBLY (FIG. 3)
Secure the cross arm to the post using the 2 (#8 x 2 1/2”) deck screws.
3. LA ASAMBLEA DE POSTE
(FIG. 3)
Adjuntar el brazo de cruz al poste que usa el 2 (#8 x 2 1/2”) cubierta atornilla.