Always there to help you Register your product and get support at www.philips.
Contents 1 Important Safety Notice 2 Your audio adapter Introduction What's in the box What else you need 3 Overview of the main unit 2 2 3 5 5 5 5 8 Product information Specifications 21 21 9 Troubleshooting 22 10 Appendix: Understand meanings of LED colors 23 6 4 Prepare 7 Download SpeakerSet Multiroom Manager to your iOS or Android device 7 Connect to your audio system 7 Connect power and switch on 8 5 Connect SW100M to your home Wi-Fi network Option 1: Set up through an iOS device Option 2
1 Important Safety Know these safety symbols g Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. h Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. i Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. j Only use attachments/accessories specified by the manufacturer.
p Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. Warning •• Never remove the casing of this apparatus. •• Never lubricate any part of this apparatus. •• Never place this apparatus on other electrical equipment. •• Keep this apparatus away from direct sunlight, naked flames or heat. •• Ensure that you always have easy access to the power cord, plug or adaptor to disconnect this apparatus from the power.
CAN ICES-3(B)/NMB-3(B). Trademark notice Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used by WOOX Innovations Limited under license from Koninklijke Philips N.V. iPad, iPhone, iPod, iPod classic, iPod nano and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. Lightning is a trademark of Apple Inc. Android is a trademark of Google Inc. Use of this trademark is subject to Google permissions.
2 Your audio adapter Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the bottom of the apparatus. Write the numbers here: Model No. __________________________ Serial No.
3 Overview of the main unit a b c d g OPTICAL OUT • Connect the audio adapter to your audio system through an optical cable (not supplied). h COAX OUT • Connect the audio adapter to your audio system through a coaxial cable (not supplied). i AUX OUT • Connect the audio adapter to your audio system through RCA audio cables (red/white; not supplied). j DC IN • Connect the power adapter. j a b • i h gf e / • Skip to the previous/next song. Start or pause music play. c -/+ • Adjust volume.
4 Prepare 2 On the initial setup page, tap Setup a new speaker. Always follow the instructions in sequence. Download SpeakerSet Multiroom Manager to your iOS or Android device 1 (For iPod touch/iPhone/iPad users) Install SpeakerSet from Apple App Store, and then run the app.
Option 2: Connect through COAXIAL OUT Connect power and switch on Caution •• Risk of product damage! Make sure that the power supply voltage matches the voltage printed on the bottom of the audio adapter. •• Risk of electric shock! When you unplug the AC adapter, always pull the plug from the socket. Never pull the cord. •• Before you connect the AC adapter, make sure that you have completed all the other connections. • Note •• Make sure that no cable is plugged in the AUX OUT sockets.
5 Connect SW100M to your home WiFi network To connect the audio adapter to your existing home Wi-Fi network, you need to apply your home Wi-Fi settings to the audio adapter in one of the following ways (depending on the type of your smart device and whether your Wi-Fi router is WPS enabled): Devices required for speaker setup iOS device + Wi-Fi router Android device + Wi-Fi router WPS Wi-Fi router PC/Mac with Wi-Fi enabled + Wi-Fi router Setup method Before connection of the audio adapter to your home Wi-
Option 1: Set up through an iOS device 1 2 4 Select Wireless (Wi-Fi) under HOW DO YOU WANT TO CONNECT?. Before setup, make sure that your iOS device is connected to your home Wi-Fi network. As instructed on the app, press and hold SETUP on the back of the audio adapter for more than 3 seconds. »» Both the system status indicator on the front panel and the Wi-Fi status indicator on the SETUP button turns solid amber.
Option 2: Set up through an Android device 1 2 Before setup, make sure that your Android device is connected to your home Wi-Fi network. As instructed on the app, press and hold SETUP on the back of the audio adapter for more than 3 seconds. »» Both the system status indicator on the front panel and the Wi-Fi status indicator on the SETUP button turns solid amber. 3 4 5 6 7 Tap Next on the above app screen, and then read how to proceed with network setup.
Option 3: Set up wireless connection to a WPS router directly 1 2 Press the WPS button on your home Wi-Fi router. WPS As instructed on the app, press and hold WPS on the back of the audio adapter for more than 3 seconds. »» The Wi-Fi status indicator on the WPS button blinks green. 3 Wait until successful connection of the speaker to your home Wi-Fi network. »» The Wi-Fi status indicator on the WPS button turns off. »» The system status indicator on the front panel turns solid green.
Option 4: Set up through a PC/Mac (advanced) 1 2 3 4 5 6 Rename speakers 1 Go to your Wi-Fi enabled PC/Mac. Press and hold SETUP on the back of the audio adapter for more than 3 seconds. »» Both the system status indicator on the front panel and the Wi-Fi status indicator on the SETUP button turns solid amber. 2 After successful Wi-Fi setup, go to the home page and tap the speaker icon on the app screen. Tap beside the speaker name.
6 Play Enjoy Spotify music services through SW100M Note •• With Spotify, you can enjoy unlimited music on your new device. Thanks to the Spotify Connect feature, you can play and control all this music wirelessly. Choose music on your mobile or tablet, and hear it on your brand new device. •• Make sure that the audio adapter is connected to your home Wi-Fi network with Internet connection available. 1 2 Switch to the Spotify app from SpeakerSet or open the Spotify app directly.
During play, you can: • press on the audio adapter to pause/resume music play. • press / on the audio adapter to skip to the previous/next song. • press +/- on the audio adapter to adjust volume level. Tip •• See the SpeakerSet app screen for more advanced settings. •• You can take your iOS or Android device away from the network, or even switch it off. In this case, Spotify music will continue to play on your audio adapter.
4 5 6 16 Tick circles beside the speakers/audio adapters to add them into the group. Tap beside the group name to enter the edit page. Edit the group name as you like on the edit page. EN 7 Tap the check mark at the top right on the above app screen, and then wait for more than 10 seconds until the grouping finishes. To ungroup speakers: 1 2 Tap beside the master speaker. Untick the box beside the speaker/audio adapter to be removed from the group.
Enjoy music streamed to the group speakers/audio adapters 1 2 On the home page, tap the icon of the master speaker on the SpeakerSet app screen. To adjust volume of all speakers/audio adapters in a group at the same time: 1 Tap Go Spotify app to play music to switch to the Spotify app. 2 3 4 5 Open the SpeakerSet app, then tap on the main page to enter the volume adjustment page. Move the group volume slider to adjust volume of all speakers/audio adapters in the group at the same time.
To adjust volume of an individual speaker/ audio adapter: • Press +/- on the top panel of the speaker/ audio adapter. • Open the SpeakerSet app, then move the slider beside the speaker/audio adapter on the above volume adjustment page directly. To play/pause music play: • Press on the top panel of any speaker/ audio adapter in the group or use controls on the Spotify app screen directly.
7 Other features 5 Tap Factory reset to enter the factory reset page. Restore factory settings In some cases, you may need to reset the audio adapter, for example, when you need to reset the Wi-Fi settings or log out from the current Spotify premium account. 1 2 3 4 Make sure that the audio adapter is powered on and connected to the same Wi-Fi network as your smartphone or tablet. Make sure that your home Wi-Fi network is connected to the Internet.
Update software 5 Tap Software update to enter the software update page. To improve product performance, Philips may offer you new software for you to update your audio adapter. Warning •• Always connect your audio adapter to AC power for firmware upgrade. Never power off your audio adapter nor close the app during firmware upgrade. 1 2 3 4 Make sure that audio adapter is powered on and connected to the same Wi-Fi network as your smartphone or tablet.
8 Product information General information AC power PHILIPS SWITCHING POWER SUPPLY Note •• Product information is subject to change without prior Specifications Operation Power Consumption Power Consumption in Network Standby Dimensions - Main Unit (L x W x H) Audio output Weight - Main Unit notice. Output Voltage Signal to Noise Ratio Total Harmonic Distortion Model: S018KU0500200; input: 100 - 240 V~, 50/60 Hz 500 mA; output: 5.0 V 2000 mA < 10 W < 2W 179 x 105 x 66 mm 0.
9 Troubleshooting Warning •• Never remove the casing of this apparatus. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this apparatus, check the following points before requesting service. If the problem remains unsolved, go to the Philips web site (www. philips.com/welcome). When you contact Philips, ensure that the apparatus is nearby and the model number and serial number are available.
10 Appendix: Understand meanings of LED colors 1 1 1 1 1 a 1 1 c 1 b 1 a System status indicator (on the front panel) 2 1 b SETUP indicator (on the back panel) c WPS indicator (on the back panel) LED colors No light 1 blinking amber slowly 1 blinking amber quickly 1 1 1 LED behavior 2 1 and 2 indicators in solid amber Status of the audio adapter Power off Booting up 1 1 blinking amber In WPS quickly, and 3 blinking mode green 1 solid green Network connection successful 1 blinking gree
P&F USA Inc. PO Box 2248 Alpharetta, GA 30023-2248 Phone 1 866 309 0845 Meet Philips at the Internet http://www.philips.com/welcome 2014 © WOOX Innovations Limited. All rights reserved. This product was brought to the market by WOOX Innovations Limited or one of its affiliates, further referred to in this document as WOOX Innovations, and is the manufacturer of the product. P&F is the warrantor in relation to the product with which this booklet was packaged.