User's Manual

9EN
5 Connect
SW100M to
your home Wi-
Fi network
To connect the audio adapter to your existing
home Wi-Fi network, you need to apply your
home Wi-Fi settings to the audio adapter in one
of the following ways (depending on the type
of your smart device and whether your Wi-Fi
router is WPS enabled):
Devices
required
for speaker
setup
Setup method
iOS device
+ Wi-Fi
router
Choose option 1 (see 'Option
1: Set up through an iOS device'
on page 10).
Android
device
+ Wi-Fi
router
Choose option 2 (see 'Option
2: Set up through an Android
device' on page 11).
WPS Wi-Fi
router
Choose option 3 (see 'Option
3: Set up wireless connection to
a WPS router directly' on page
12).
PC/Mac
with Wi-Fi
enabled
+ Wi-Fi
router
Choose option 4 (see 'Option
4: Set up through a PC/Mac
(advanced)' on page 13).
Before connection of the audio adapter to your
home Wi-Fi network, make sure that:
a your Wi-Fi router is powered on and
working properly.
b the audio adapter has been powered
on and booted up successfully.
c (for option 1, 2 and 4 only) you have
jotted down the password of your
home Wi-Fi router.
* If your Wi-Fi password contains such special
characters as #/:/;/', you need to change your
password.
Once connected successfully, the audio adapter
will remember your home Wi-Fi settings.
Whenever the audio adapter is powered on,
it is connected to your home Wi-Fi network
automatically.