Always there to help you Register your product and get support at www.philips.
Contents 1 Important safety instructions Hearing Safety General information 2 Your Bluetooth in-ear headphones What's in the box Other devices Overview of your Bluetooth in-ear headphones 3 Get started Charge your headphones Pair the headphones with your mobile phone 4 Use your headphones Connect the headphones to a Bluetooth device Manage your calls and music Share your music 5 Technical data 2 2 2 3 3 3 3 4 4 4 6 6 6 7 8 6 Notice 9 Notice of compliance 9 Disposal of your old product and battery 9
1 Important safety instructions General information To avoid damage or malfunction: Caution Hearing Safety •• Do not expose headphones to excessive heat. •• Do not drop your headphones. •• Headphones shall not be exposed to dripping or splashing. •• Do not allow your headphones to be submerged in water. •• Do not use any cleaning agents containing alcohol, ammonia, benzene, or abrasives.
2 Your Bluetooth in-ear headphones Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. With this Philips wireless in-ear headphones, you can: • enjoy convenient wireless handsfree calls; • enjoy and control wireless music; • switch between calls and music. What's in the box Quick start guide Other devices A mobile phone or device (e.g.
3 Get started • • Manual pairing NFC pairing Manual pairing Charge your headphones Note 1 2 •• Before you use your headphones for the first time, charge the battery for 5 hours for optimum battery capacity and lifetime. •• Use only the original USB charging cable to avoid any damage. •• Finish your call before charging the headphones, as connecting the headphones for charging will power the headphones off. •• You can operate the headphones normally during charging.
2 Enter the headset password "0000" (4 zeros) if prompted. For those mobile phones featuring Bluetooth 3.0 or higher, no need to enter a password.
4 Use your headphones Connect the headphones to a Bluetooth device 1 2 Turn on your mobile phone/Bluetooth device. Press and hold the on/off button to turn the headphones on. »» The blue LED flashes. »» The headphones are reconnected to the last connected mobile phone/ Bluetooth device automatically. If the last one is not available, the headphones try to reconnect to the second last connected device.
The headphones are on but not connected to a Bluetooth device. Low battery level. Battery is fully charged. The blue LED flashes quickly. If no connection can be made, the headphones will turn itself off within 5 minutes. The white LED flashes 3 times for every 10 seconds until it is out of power. White LED is off. Share your music With MusicChain™, you can create a series of songs and share music between two same headphones. Headphones A Connect to mobile phone A.
5 Technical data • • • • • • • • Up to 7.5 hours of music time or 6 hours of talk time Up to 170 hours of standby time Normal time for a full charge: 2 hours Rechargeable lithium polymer battery (125 mAh) Bluetooth 4.
6 Notice Notice of compliance Notice for US This set complies with the FCC rules, Part 15 and with 21 CFR 1040.10. Operation is subject to the following two conditions: a This device may not cause harmful interference, and b This device must accept any interference received, including interference that may cause undesired operation. FCC rules This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
your local authorities or visit www.recycle. philips.com. This product contains non-removable batteries: • Do not incinerate. Batteries may explode if overheated. • For disposal or recycling information, please contact your local authorities or visit www.recycle.philips.com. Remove the integrated battery Note •• Make sure the headset is disconnected from the USB charging cable before removing the battery.
7 Frequently asked questions My Bluetooth headphones do not switch on. The battery level is low. Charge the headphones. I cannot pair my Bluetooth headphones with a mobile phone. The Bluetooth is disabled. Enable the Bluetooth feature on your mobile phone and turn on the mobile phone before you turn on the headphones. Pairing does not work. Make sure the headphones are in pairing mode. • Follow the steps described in this user manual (see 'Pair the headphones with your mobile phone' on page 4).
2015 © Gibson Innovations Limited. All rights reserved. This product has been manufactured by, and is sold under the responsibility of Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product. Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V. UM_TX2BT_27_EN_V1.
English: Notice of compliance The device complies with the FCC rules, Part 15. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. FCC rules This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
French: Avis de conformité Cet appareil satisfait aux règlements de la FCC partie 15 du Code of Federal Regulations. Son fonctionnement est assujetti aux deux conditions suivantes : 1. Cet appareil ne doit pas causer d’interférence préjudiciable et 2. l’appareil doit accepter toute interférence reçue, y compris les interférences qui peuvent causer un fonctionnement non désiré.