Always there to help you Register your product and get support at www.philips.
Contents 7 Wall mount your SoundBar 21 21 Wall mount 1 Important Important safety instructions Care for your product Care of the environment Help and support 2 Your SoundBar Main unit Remote control Wireless portable speakers Wireless subwoofer Connectors 3 Connect and set up Charge portable speakers Pair up with subwoofer/speakers Place speakers Connect audio from TV Connect audio from other devices Connect digital devices through HDMI 4 Spatial calibration Step 1: calibrate the listening zone Step
1 Important • Read and understand all instructions before you use your product. If damage is caused by failure to follow instructions, the warranty does not apply. • Important safety instructions • • • • • • • • • • • • 2 Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
your local authorities or visit www.recycle. philips.com. This product contains non-removable batteries: • Do not incinerate. Batteries may explode if overheated. • For disposal or recycling information, please contact your local authorities or visit www.recycle.philips.com. 2 Your SoundBar Congratulations on your purchase, and ZHOFRPH WR 3KLOLSV 7R IXOO\ EHQHÀW IURP the support that Philips offers, register your SoundBar at www.philips.com/welcome. Main unit For extensive online support, visit www.
c / For Bluetooth on the main unit only: skip to the previous or next track. d For Bluetooth on the main unit only: play, pause or resume. o MOVIE Select surround sound mode. portable speakers docked into the main unit). p TREBLE +/Increase or decrease treble on the main unit. e BASS +/Increase or decrease bass on the main unit. Wireless portable speakers f Volume control • +/-: Increase or decrease volume. • : Mute or restore volume.
Connect to an optical audio output on the TV or a digital device. f HDMI IN1 / HDMI IN2 Connect to the HDMI output on a digital device. g TO TV-HDMI OUT (ARC) Connect to the HDMI (ARC) input on the TV. h AC MAINS~ Connect to the power supply. 3 Connect and set up » When fully charged, the LED on the portable speaker lights up white for 10 seconds. Note This section helps you connect your SoundBar to a TV and other devices, and then set it up.
4 If the pairing fails, repeat the steps above. Follow these general guidelines for speakers placement. Pair up with the speakers 1 1 2 2 3 Turn on the SoundBar and the portable speakers. » If the connection to the SoundBar is lost, the LED on the portable blinks in red and orange alternatively. Dock the portable left and right speakers into the main unit to pair up automatically. If the pairing fails, re-dock the portable speakers into the main unit.
2 DVD Press OPTICAL on the remote control of this product to enable the optical connection. Option 2: Connect to other device through coaxial cable • 2 The analog audio output on the external device might be labeled AUDIO OUT. Press AUX on the remote control of this product to enable the analog audio connection. Best quality audio 1 2 Connect digital devices through HDMI Using an analog audio cable, connect the AUX connectors on this product to the analog audio output on the TV.
4 Spatial calibration 1 Spatial calibration is used to achieve the following convenience, and simultaneously optimizes surround sound experience for it. • Have freedom to place the portable left and right speakers (surround) according to your need. • Automatically balance the portable speakers (surround) with respect to your seating position. The spatial calibration involves two steps.
5 Use your SoundBar This section helps you use the SoundBar to play audio from connected devices. Before you start • Make the necessary connections described in the quick start guide and the user manual. • Switch the SoundBar to the correct source for other devices. Adjust the volume Voice clarity It makes human voice more clear and outstanding for listening. 1 2 1 When the portable left and right speakers are wirelessly connected to the main unit (in SURROUND ON DEMAND mode), press REAR VOL.
Bluetooth on the main unit 1 2 3 Press on the remote control to switch the main unit to Bluetooth mode. » BT on the display blinks. On the Bluetooth device, switch on Bluetooth, search for and select Fidelio B5 to start connection (see the user manual of the Bluetooth device on how to enable Bluetooth). » During connection, BT on the display blinks. Wait until BT on the display lights up. » If the connection succeeds, BT on the display lights up. 3 5 6HOHFW DQG SOD\ DXGLR ÀOHV RU PXVLF RQ your Blueto
6 Update software » Then "UPG" (upgrade) is displayed on the display panel. 6 To get the best features and support, update your product with the latest software. What you need • $ 86% ÁDVK GULYH WKDW LV )$7 IRUPDWWHG Do not use a USB hard drive. • A computer with Internet access. • $Q DUFKLYH XWLOLW\ WKDW VXSSRUWV WKH =,3 ÀOH format. Wait until the upgrade is completed. » If the upgrade is complete, this product automatically turns off and on again.
8 Product specifications • • • • • Note • 6SHFLÀFDWLRQV DQG GHVLJQ DUH VXEMHFW WR FKDQJH ZLWKRXW notice. $PSOLÀHU • • • • • FTC total output power: 66W • Front Left + Right: 16W (1%THD, 8ohm, 150Hz-20kHz) • Surround Left + Right: 20W (1%THD, 8ohm, 150Hz-20kHz) • Subwoofer: 30W (1%THD, 4ohm, 30Hz-140Hz) Total output power: 210W RMS (+/- 0.5 dB, 30% THD) / 168W RMS (+/- 0.
automatically to save power. This does not indicate any malfunction of the SoundBar. Spatial calibration Why spatial calibration is needed? • Spatial calibration optimizes surround sound experience if your portable left and right speakers (surround) are not properly placed. Improvement in surround sound is not noticeable after successful spatial calibration.
7KH WHUPV +'0, DQG +'0, +LJK 'HÀQLWLRQ Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Gibson Innovations Limited is under license. Other trademarks and trade names are those of their respective owners. The N Mark is a trademark or registered trademark of NFC Forum, Inc.
2015 © WOOX Innovations Limited. All rights reserved. Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used by WOOX Innovations Limited under license from Koninklijke Philips N.V.
English Care of the environment Español Disposal of your old product and battery Important Read and understand all instructions before you use your product. If damage is caused by failure to follow instructions, the warranty does not apply. Help and support For extensive online support, visit www.philips.
cualquier persona distinta de un establecimiento de servicio autorizado; (c) a productos o piezas que se hayan modificado sin la authorización por escrito; (d) si se ha retirado o desfigurado cualquier número de serie; y tampoco se aplica la garantía a (e)productos, accesorios o insumos QUIÉNES ESTÁN CUBIERTOS: vendidos TAL COMO ESTÁN sin garantía de ningún tipo, lo que incluye Este producto está garantizado al comprador original o a lapersonaque lo productos Philips vendidos TAL COMO ESTÁN por algunos reci
