Installation guide

1. Make sure you have all the necessary parts.
Installation kit contents:
1. Platform (1)
2. Support brace (1)
3. Adjustment bolt (1)
4. Hex flange nut - 1/4" (1)
5. Track seal (1)
6. Side channel seal (1)
7. Foam seal strip/Sash seal
8. Safety bracket (1)
9-11. Screw - #10x2-1/2" flat-head (2), OR
Screw - #10xt-3/4" pan-head (2), OR
Screw - #10xl" pan-head (2)
12. Screw- #8x3/4" pan head (6)
13. Screw- #8-32x3/4" self-threading (7)
14. Window locking bracket (1)
15. Plastic window panel (1)
16. Side channel (2)
17. Screw- #8x3/8 truss head (6)
18. Panel frame/seal assembly (1)
NOTE: Use scale below to measure length of your
screws. The scale will come in handy when
separating screws for installation.
(13ram)
IDENTIFY SCREWS 1/2"
BY LENGT_
(25mm) (44mm) (63mm)
1" 1 3/4" 2 1/2"
3/8" 3/4" 1 1/2" 2"
(10mm)(19mm) (28mm) (50mm)
2, Choose a proper sized window, as shown right.
. 15-1/2 inches minimum width
, 16-1/4 inches maximum width (for
casement windows)
. 21-1/4 inches minimum height (with
window panel retainer)
° 20-5/16 inches minimum height
(window panel retainer removed)
, 39-7/16 inches maximum height
NOTE: Height measurement must be of a clear
opening above mounting platform. In some cases,
due to a variety of stop and track arrangements, the
above dimensions may vary slightly. If necessary,
installation can be made by alternating window
jambs. (See Alternate Window Jamb Applications.)
(continued)
k
15/2 inches
-_ minimum
width
20 %6inches
minimum
height
39 7/_6inches
maximum
Hight /
16/4 inches
maximum
width
(casement
windows)