GCG91226 Cooker User Manual
Contents Safety information Safety instructions Product description Before first use Hob - Daily use Hob - Hints and tips Hob - Care and cleaning 2 4 7 8 9 10 10 Oven - Daily use Oven - Clock functions Oven - Using the accessories Oven - Hints and tips Oven - Care and cleaning Troubleshooting Installation 11 13 13 14 18 19 20 Subject to change without notice. Safety information Before the installation and use of the appliance, carefully read the supplied instructions.
• • • • • • • • • • • • • • • • This appliance is intended for use up to an altitude of 2000 m above sea level. This appliance is not intended to be used on a ships, boats or vessels. Do not install the appliance behind a decorative door in order to avoid overheating. Do not install the appliance on a platform. Do not operate the appliance by means of an external timer or separate remote-control system. WARNING: Unattended cooking on a hob with fat or oil can be dangerous and may result in fire.
• • • Ensure that the appliance is switched off before replacing the lamp to avoid the possibility of electric shock. If the mains power supply cable is damaged, it must be replaced by the manufacturer, its Authorised Service Centre or similarly qualified persons to avoid an electrical hazard.
• Fully close the appliance door, before you connect the mains plug to the mains socket. Gas connection • • • • • All gas connections should be made by a qualified person. Before installation, make sure that the local distribution conditions (nature of the gas and gas pressure) and the adjustment of the appliance are compatible. Make sure that there is air circulation around the appliance. The information about the gas supply is on the rating plate.
• This appliance is for cooking purposes only. It must not be used for other purposes, for example room heating. Care and Cleaning WARNING! • Internal light • Risk of injury, fire, or damage to the appliance. • • • • • • • • • • Before maintenance, deactivate the appliance. Disconnect the mains plug from the mains socket. Make sure the appliance is cold. There is the risk that the glass panels can break. Replace immediately the door glass panels when they are damaged.
Product description Cooker specification GCG91226XA 943006305 Check the table to see your appliance's detailed specification.
Cooking surface layout 1 2 3 6 5 4 1 Auxiliary burner 2 Steam outlet - number and position depend on the model 3 Semi-rapid burner 4 Semi-rapid burner 5 Triple Crown burner 6 Rapid burner Accessories • • • • Wire shelf For cookware, cake tins, roasts. Baking tray For cakes and biscuits. Turnspit For roasting larger joints of meat and poultry. Storage compartment The storage compartment is below the oven cavity. To use the compartment, lift the lower front door then pull it down.
Hob - Daily use WARNING! Refer to Safety chapters. Ignition of the hob burner Always light the burner before you put on the cookware. WARNING! Be very careful when you use open fire in the kitchen environment. The manufacturer declines any responsibility in case of the flame misuse. If after some tries the burner does not light, check if the crown and its cap are in the correct position.
D. Thermocouple (if applicable) WARNING! Always turn the flame down or switch it off before you remove the pans from the burner. Turning the burner off To put the flame out, turn the knob to the off position . Hob - Hints and tips WARNING! Diameters of cookware Refer to Safety chapters. WARNING! Use cookware with diameters applicable to the size of burners. Cookware WARNING! Do not put the same pan on two burners.
you wash the pan supports by hand and dry them. If necessary, remove stubborn stains with a paste cleaner. 3. After you clean the pan supports, make sure that they are in correct positions. 4. For the burner to operate correctly, make sure that the arms of the pan supports are aligned with the centre of the burner. difficult lighting and check that the burner crown holes are not obstructed. Pan supports The pan supports are not resistant to washing in a dishwasher. They must be washed by hand. 1.
push it to light the burner. Release the spark generator button when burner lights. Keep the knob for the oven functions pushed for 15 seconds or less to let the thermocouple warm up. If not, the gas flow is interrupted. 3. Turn the knob for the oven functions to set the necessary heat setting. Control the flame trough the holes in the bottom of the oven.
Oven - Clock functions Minute Minder This function has no effect on the operation of the appliance. Turn the knob for the timer as far as it goes, then turn it to necessary time period. After the time period is completed, an acoustic signal sounds. Oven - Using the accessories WARNING! Using the turnspit Refer to Safety chapters. WARNING! Be careful when you use the turnspit. The forks and the spit are sharp. There is a risk of injury.
A 4. Install the first fork on the spit, then put the meat on the turnspit and install the second fork. Make sure that the meat is in the middle of the spit. 5. Use the screws to tighten the forks. 6. Put the tip of the spit into the turnspit hole. Refer to "Product description" chapter. 7. Put the front part of the spit on the support hook. 8. Remove the turnspit handle. 9. Light the grill. Refer to "Oven - Daily use" chapter. 10. Press the turnspit button . 11. Make sure that turnspit rotates. 12.
Cooking meat and fish • If you cannot find the settings for a special recipe, look for the one that is almost the same. • You can extend baking times by 10 – 15 minutes if you bake cakes on more than one shelf position. • Cakes and pastries at different heights do not always brown equally at first. If this occurs, do not change the temperature setting. The differences equalize during the baking procedure.
Meat & Poultry Food Quantity (kg) Tem‐ pera‐ ture (°C) Time (min) Grill posi‐ tion Grilling time (min) Total prepara‐ tion time (min) Shelf posi‐ tion Sheep 3.0 - 4.0 210 90 120 max. 90 - 120 90 - 120 2 Chicken 2.0 - 3.5 225 90 100 min. 90 - 100 90 - 1001) 2 Duck 2.4 - 3.6 240 90 100 max. 90 - 100 90 - 100 2 Goose 5.0 - 6.0 225 100 120 max. 100 - 120 100 - 120 2 Rabbit 2.0 - 3.0 195 90 120 min. 90 - 120 90 - 120 2 Beef 2.4 - 3.0 210 90 120 min.
Cakes Food Flat cake Quantity (kg) Tem‐ pera‐ ture (°C) Time (min) Grill posi‐ tion Grilling time (min) Total prepara‐ tion time (min) Shelf posi‐ tion 1.2 - 1.5 165 35 - 40 min. 5 - 10 35 - 40 2 Sponge cake 3.0 - 3.5 150 110 120 - - 110 - 120 2 Feter Mshalted 2.5 - 3.0 190 50 - 55 min. 5 - 10 50 - 55 2 3.0 - 3.5 195 50 - 60 - - 50 - 60 2 2.5 - 3.0 195 45 - 50 min. 5 - 10 45 - 50 2 1) 1) Salty cake 1) Yeast cake 1) 1) Preheat the oven for 15 minutes.
Oven - Care and cleaning WARNING! Refer to Safety chapters. Notes on cleaning • • • • • • Clean the front of the appliance with a soft cloth with warm water and a cleaning agent. To clean metal surfaces, use a dedicated cleaning agent. Clean the appliance interior after each use. Fat accumulation or other food remains may result in a fire. Clean stubborn dirt with a special oven cleaner. Clean all accessories after each use and let them dry. Use a soft cloth with warm water and a cleaning agent.
Replacing the lamp 3 Put a cloth on the bottom of the interior of the appliance. It prevents damage to the lamp glass cover and the cavity. 2 2 WARNING! 7. Clean the oven door with water and soap. Clean inner side of the door. Dry the oven door carefully. When the cleaning is completed, install the glass panels and the oven door. To install the oven door, do the above steps in the opposite sequence. 1. Deactivate the appliance. 2. Remove the fuses from the fuse box or deactivate the circuit breaker.
Problem Possible cause Remedy The flame ring is uneven. Burner crown is blocked with food residues. Make sure that the injector is not blocked and the burner crown is clean. The burners do not work. There is no gas supply. Check the gas connection. The appliance makes noises. Some metal parts of the appli‐ ance expand and contract when they heat up or cool down. The noises are normal. The flame colour is orange or yellow. The flame can look orange or yellow in some areas of the burner.
Location of the appliance Minimum distances You can install your freestanding appliance with cabinets on one or two sides and in the corner. Keep a distance of about 1 cm between the appliance and the back wall to make sure that the lid opens. For minimal distances for fitting check the table.
Gas burners for NATURAL GAS G20 20 mbar BURNER NORMAL POWER kW REDUCED POWER kW INJECTOR MARK 1/100 mm Triple Crown 4.0 1.8 146 Rapid 3.0 0.72 119 Semi-rapid 2.0 0.43 96 Auxiliary 1.0 0.35 70 Oven 3.6 1.5 126 Grill 2.5 1.6 111 Gas burners for LPG G30 28-30 mbar BURNER NORMAL POWER kW GAS RATE g/h REDUCED POW‐ ER kW INJECTOR MARK 1/100 mm Triple Crown 4.0 290.8 1.8 101 Rapid 3.0 218.1 0.72 88 Semi-rapid 2.0 145.4 0.43 71 Auxiliary 1.0 72.7 0.35 50 Oven 3.
Flexible nonmetal pipes connection If you have an easy access to the connection, you can use a flexible pipe. The flexible pipe must be tightly attached by clamps. In installation always use the pipe holder and the gasket.
WARNING! 4. 5. Replace the rating plate (it is near the gas supply pipe) with the one for the new type of gas supply. You can find this plate in the bag supplied with the appliance. If the supply gas pressure is not constant or it is different from the necessary pressure, install an applicable pressure adjuster on the gas supply pipe. 5. 6. 7. 8. Put the mains plug into the mains socket only if all parts are back into their initial position. There is a risk of injury. Light the burner.
A B 3. Unscrew the screw and slowly pull out the burner. Assemble the burner in a revers sequence. Replace the gas type sticker near the gas supply ramp with the one related to the new gas type. Adjusting the minimum gas level on the oven burner 1 2 1. Disconnect the appliance from the electricity. 2. Remove the knob for the oven functions. If there is no access to the bypass screw dismount the control panel before adjustment start. 3. With a thin and flat screwdriver adjust the bypass screw A.
Changing from liquid gas to natural gas 1. Unscrew approximately one turn the bypass screw position A. 2. Put the knob for the oven functions back. 3. Connect the appliance to the electricity. WARNING! Put the mains plug into the mains socket only if all parts are back into their initial position. There is a risk of injury. 4. Light the burner. Refer to "Oven - Daily use" chapter. 5. Turn the knob for the oven functions on the minimum position. 6. Remove the knob for the oven functions again. 7.
To install all the accessories, do the first step in an opposite sequence. Electrical installation WARNING! The manufacturer is not responsible if you do not follow the safety precautions from Safety chapters. This appliance is supplied with a main plug and a main cable. B WARNING! The power cable must not touch the part of the appliance shaded in the illustration. 4. If the floor is not equally flat, use the adjustable feet on the bottom of the appliance to set a stable position for the appliance.
Made in Egypt 867330217-D-452018