User manual

Be very careful when you
replace the pan supports to
prevent the hob top from
damage.
2. The enamel coating occasionally can
have rough edges, so be careful when
you wash the pan supports by hand and
dry them. If necessary, remove stubborn
stains with a paste cleaner.
3. After you clean the pan supports, make
sure that they are in correct positions.
4. For the burner to operate correctly, make
sure that the arms of the pan supports are
aligned with the centre of the burner.
Periodic maintenance
Speak to your local Authorised Service
Centre periodically to check the conditions of
the gas supply pipe and the pressure
adjuster, if fitted.
Oven - Daily use
WARNING!
Refer to Safety chapters.
Oven Functions
Oven function Application
Off position The oven is off.
125-
260°C
Heat settings Range of temperature adjustment.
Grilling To grill flat food in the middle of the grill. To make
toast.
Oven lamp To illuminate the oven interior.
To use this function, press the button for the lamp.
Manual ignition of oven gas burner
Oven safety device:
The gas oven has a thermocouple.
It stops the gas flow if the flame
goes out.
1. Open the oven door.
2. Hold the flame near the hole in the bottom
of the oven cavity.
3. At the same time push the knob for the
oven functions and turn it
counterclockwise to the maximum gas
flow position.
4. When the flame comes on, keep the knob
for the oven functions pushed on the
maximum gas flow position for 15
seconds or less to let the thermocouple
warm up.
Do not keep the knob for the oven
functions pushed for more than 15
seconds. If the oven burner does
not light after 15 seconds, release
the knob for the oven functions,
turn it into off position, open the
oven door and try to light the oven
burner again after minimum 1
minute.
10