User manual

3. With a thin and flat screwdriver adjust the
bypass screw A.
The model determines the position of the
bypass screw A.
A
Levelling
CAUTION!
Remove all the accessories from
the oven.
1. Disassemble the pan supports and all the
burner assemblies.
2. Put the appliance on the sidewall on a
clean and smooth surface. Place each
foot into a separate hole, in the plinth, and
rotate it clockwise.
B
3. If the floor is not equally flat, use the
adjustable feet on the bottom of the
appliance to set a stable position for the
appliance.
To install all the accessories, do the first step
in an opposite sequence.
Anti-tilt protection
Set the correct height and area for the
appliance before you attach the anti-tilt
protection.
CAUTION!
Make sure you install the anti-tilt
protection at the correct height.
Make sure that the surface behind
the appliance is smooth.
You must install the anti-tilt protection. If you
do not install it, the appliance can tilt.
Your appliance has the symbol shown on the
picture (if applicable) to remind you about the
installation of the anti-tilt protection.
20