User manual

1. Install the anti-tilt protection 232 - 237 mm
down from the top surface of the
appliance and 110 - 115 mm from the side
of the appliance into the circular hole on a
bracket. Screw it into the solid material or
use applicable reinforcement (wall).
110-115
mm
232- 237
mm
2. You can find the hole on the left side at
the back of the appliance. Lift the front of
the appliance and put it in the middle of
the space between the cupboards. If the
space between the bench cupboards is
larger than the width of the appliance, you
must adjust the side measurement to
centre the appliance.
If you changed the dimensions of
the cooker, you must align the non-
tip device correctly.
CAUTION!
If the space between the bench
cupboards is larger than the width
of the appliance, you must adjust
the side measurement to the
centre of the appliance.
Electrical installation
WARNING!
The manufacturer is not
responsible if you do not follow the
safety precautions from Safety
chapters.
This appliance is supplied with a main plug
and a main cable.
WARNING!
The power cable must not touch
the part of the appliance shaded in
the illustration.
Environmental concerns
Recycle materials with the symbol . Put the
packaging in relevant containers to recycle it.
Help protect the environment and human
health by recycling waste of electrical and
electronic appliances. Do not dispose of
appliances marked with the symbol with the
household waste. Return the product to your
local recycling facility or contact your
municipal office.
21
*