User's Manual Part 2

Getting Connected

1. Tap Start > Settings > Connections tab > Wi-Fi > Network Adapters tab.

2. In

My network card connects to drop-down list, tap either The Internet or Work. If you are connecting to your

ISP at home, tap The Internet. If you are connecting to a private network such as a corporate network at work,

tap Work.

3. Tap the appropriate adapter in

Tap an adapter to modify settings box. The IP address will now appear in IP

Address box on IP Address tab.

4. To change TCP/IP settings if your ISP or private network does not use dynamically assigned IP addresses, tap

Use specific IP address and enter the requested information. Contact your ISP or network administrator to get

the IP address, Subnet mask, and/or Default gateway (if needed).

5. To change DNS and WINS settings if your ISP or private network does not use dynamically assigned IP

addresses, tap Name Servers tab and enter the requested information. Servers that require an assigned IP

address may also require a way to map computer names to IP address. DNS and WINS are the resolution options

supported on your MWg Atom V.

Please note: After activating Wi-Fi, a new window, New Network Detected, will appear if any is detected. Select

Connect and enter your password to the local network. Tap Connect to connect this device with local network.

You may use Wi-Fi for up to 2 hours. The actual use time will depend on the power status of your battery. When this

feature is not in use, please disable it to save power.

6.5 USB card reader

You may use the device as a mass storage device or a micro SD card reader.

1. Tap

Start > Settings > Connections tab > USB.

2. On

USB Connection Mode screen, tap SD-Card Reader, and then tap Change.

3. Connect the phone to the computer with USB cable.

4. Your PC will automatically detect the new hardware. Now you can view or transfer les to and from your micro SD

card.

6.6 Internet sharing

By using utility, you can set your MWg Atom V as a wireless modem. Internet Sharing allows your PC/Notebook be

connected to a wireless network.

1. Tap

Start > Programs > Internet Sharing.

2. Select a

USB or Bluetooth PAN as PC Connection type.

3. Connect your device via USB cable or Bluetooth to a PC/Notebook, and then tap

Connect.

Please note: Before you tap Connect, please make sure that your have installed a GPRS SIM card, and that you

have connected this phone to your PC/Notebook by USB cable or Bluetooth and disabled ActiveSync.