User's Manual

Plea se n ot e: After activating W i-Fi, a new
window, New Network Detected, will appear if
any is detected. Select Connect and enter your
password to the local network. Tap Connect to
connect this device with local network. You may
use Wi-Fi for up to 2 hours. The actual use time
will depend on the power status of your battery.
While this feature is not in use, please disable it
to save power.
6.5 USB card reader
You may use the device as a mass storage
device or a mini SD card reader.
1. Tap Start > Settings > Connections tab >
USB
2. On US B Co nne ctio n Mod e sc ree n, t ap
SD-Card Reader, and then tap Change
.
3. Connect the phone to the computer with USB
cable.
4. Your PC will automatically detect the new
hardware. Now you can view or transfer files
to and from your mini SD card.
6.6 Internet Sharing
By using utility, you can set your O2 Xda Stealth
as a wireless modem. Internet Sharing allows
your PC/Notebook be connected to a wireless
network. Before creating a new modem via the
selected connection type, you still need to install
the drivers on your PC/ Notebook. Please find
the drivers in the ActiveSync and Application
Software CD.
1. Tap Start
> Programs > Internet Sharing.
2.S e l ect a USB or Bluet o o t h PA N as P C
Connection type.
3. C on n e c t your p h o n e via U S B c a b l e or
Bluetooth to a PC/ Notebook, and then tap
Connect
.
Please note: Before you tap Connect, please
make sure that your have installed a GPRS SIM
card, and that you have connected this phone to
your PC/Notebook by USB cable or Bluetooth
and disabled ActiveSync
.
6.7 Terminal Services Client
Using Terminal Services Client, you can log
onto a PC running Terminal Services or Remote
Desktop and use all of the programs available on
that PC from your mobile device. For example,
instead of running Word Mobile, you can run the
PC version of Word and access all of the .doc
files on that PC from your device. Connecting
to a terminal server starts a remote connection
to the ser ve r via a G PRS or Wi re less LA N
connection:
1. Tap Start > Programs > Terminal Services
Client
.
2. To connect to a server you have previously
connect ed to, define a ser ver in Rec e nt
ser vers. To connect to a new server, enter
the server’s name in the Server box. Check
Limit size of server desktop to fit on this
screen box only when using applications that
have been specifically sized for use with the
device.
3. Tap Connect
.
Pl e a se not e : I f the net work ad min ist r ato r
ha s conf i gur ed Te r min a l S er v ices Clien t
to reconnec t to disconnected sessions, and
you previously disconnected from a Terminal
Server without ending the session, the Terminal
Services Client will reconnect to that session.
N a v i g a t i n g w i t h i n T e r m i n a l
Services Client
Once connected to the server, the PC’s screen
may more than fill your phone’s screen. If scroll
bars are displayed on the server’s screen, you
will see more than one set of scroll bars on your
device: one to scroll information on the PC, and
one to scroll the PC display through Terminal
63
6
Getting started