User's Manual

Introduction
Congratulations on your purchase of the most innovative wireless optical mouse. With an incredible sensitivity to
surface details and high tracking speed than other mice, the wireless optical mouse can track reliably on tricky
wood-grain surfaces. It is much more advanced than you imagine and will make you more productive and
comfortable.
Features
 Auto link, plug-and-play! No need to set the channel ID
 2.4GHz, 800/ 1200/ 1600/ 2000 DPI adjustable
 Nano receiver
 Optical tracking engine with high tracking speed and sensitivity
 Power on/off , DPI, and GIGABYTE Free-Scrolling Technology™ switch
 2*AA batteries included, can be activated with only one battery
Hardware Installation
1. Insert batteries
a. Remove the battery compartment cover in the case
b. Fit in the batteries accordingly to the diagram indicated in the battery cabinet
c. Close the battery compartment cover properly
d. Make sure the Power on-off switch on the mouse in ON
e. The LED on the bar will blink 3 seconds if the mouse power is on
Warning: A wrong battery placement may cause batteries overheat
△
△△
△ Note
The unit offers a strong power saving management. Once the mouse accesses sleeping mode, to clip any key on
the mouse is compulsory to wake it up.
Power on/off: There is a power on/off switch designed to save the batteries power while non-usage of a longer
period.
Connect the Receiver
1. Turn on your PC
2. Connect the receiver to USB on PC