User's Manual

GN-BR31NE-RH 2.4GHz AirCruiser N150 Wireless Router
2
Side Panel
The side panel of the GN-BR31NE-RH Wireless Broadband Router contains all
the Router’s ports as well as the DC power port and initialization button.
Figure 1: Router’s Side Panel
Reset Button There are two ways to reset the Router's factory defaults.
Either press the Reset Button, for approximately five seconds,
or restore the defaults from the Management Tools>Router
Initialization screen in Router's Web-based Utility.
WAN The WAN port is where you will connect your broadband
Internet connection.
LAN1, 2, 3, 4 These ports (1, 2, 3, 4) connect the Router to PCs on your
wired network and other Ethernet network devices.
Power The Power port is where you will connect the power adapter.
WPS The WPS Button is Wi-Fi Protected Setup & RF ON/OFF
function, if you want to enable WPS function, just press the
A
uto MDI/MDI
X
LAN
Ports
A
uto MDI/MDIX WAN Port for
connecting to DSL or Cable
modem
WPS & RF ON/OFF
button
Receptor for
Power
Adapter
Factory Reset
button