User's Manual

GN-BTD01 Bluetooth User’s Guide
5-6
5.3.3 LAN Access Using Point-To-Point Protocol (LAP)
Service
The Local Area Network (LAN) Access permits a Bluetooth-enabled
personal computer to use an Ethernet connection that is physically located
on another Bluetooth-enabled computer or Network Access Point (the
“gateway”). Only Point-to-Point Protocol (PPP) is supported.
 LAP Server Setup (Windows 2000)
1) Click the Start button and then select Settings, and Network and
Dial-up Connections.
2) Double-Click the Local Area Connection icon.
3) Click the Sharing tab.
4) Click the Enable Internet Connection Sharing for this connection box
to check it.
5) Click OK to close the window.(Message: “When Internet Connection
Sharing is enabled, your LAN adapter will be set to use IP address
NNN.NNN.N.N. Your computer may lose connectivity with other
computers on your network. If these other computers have static IP
address, you should set them to obtain their IP address automatically.
Are you sure you want to enable the Internet Connection Sharing? ”)
6) Click Ye s to confirm that Internet Connection Sharing should be enabled.
The server configuration is now complete.