User's Manual

Chapter 2. Installing the WLAN Card

This chapter will assist you in completing the hardware and software installation of the

GN-WI02GM Wireless Mini-PCI Adapter successfully. Please refer to the driver & utility

installation section that matches your operating system.

2-1. Installing the Wireless Mini-PCI Adapter

Step 1: Turn off your PC and disconnect the power cord.

Step 2: Remove the PC cover.

Step 3: Locate an available Mini-PCI slot and remove its back plate from the PC chassis.

Step 4: Insert the GN-WI02GM Mini-PCI Adapter into the slot and fasten it to the chassis

using the screws in step 3.

Step 5: Power on your desktop PC.