Integration Manual

1
Chapter 1. Product Overview
1-1. Introduction to The Wireless LAN Card
This wireless LAN (Local Area Network) card is composed of the IEEE 802.11b MAC,
Baseband, and radio components, PCMCIA interface, and two built-in antennas. This
product adopts the direct sequence spread spectrum (DSSS) technology and the DBPSK,
DQPSK, and CCK modulation mode to provide a very stable wireless communication
quality and an excellent signal receiver capability.
Our product features the compact size, low power consumption, and power management
functions, and provides a high-speed wireless data communication. Therefore, our
product is ideally suitable for being integrated into Access Point, Router or Gateway and
the other network products.
1-2. Features
! Conforms to IEEE 802.11b specification.
! Transmits data rate up to the maximum speed of 11Mbps.
! Dynamically scales the data rate to 11, 5.5, 2, and 1Mbps.
! Automatic power management to reduce battery consumption.
! Supports 64-bit /128-bit WEP encryption.
! Provide Tertiary 1.2.1 (AP mode firmware) for customer to build their wireless
communication function.
1-3. Physical Dimensions/Packaging
Dimensions: 88 mm x 54 mm x 6 mm
This wireless LAN card conforms to the PC card Type II Standard.