Owner manual

ASSEMBLY INSTRUCTIONS: Model # CT 008

X 4

X 2

Step ‘’1’’ tent setup (To prolong the life of the tent floor, select a level, clean area for the

campsite)

1) spread the tent body on the ground

2) Fully open all poles.

3) Thread fiberglass poles thru poles sleeves at top of tent.

(figure A)

4) Insert pole into pocket. Bend pole and insert tip into opposite pocket repeat

for second pole (figure B)

5) Tie the top of the tent to the poles (figure C)

6) Stake the tent down. (figure D)

Step ‘’2’’ attach the rainfly

1) Drape fly over tent.

2) Attach Velcro to poles.

(figure G)

3) Hook corners of fly to the tent. (figure H)