Owner manual

Contents and colors may vary. Please retain package
or future reference.
STYLE #:CT032T / CT032D
WASHING & CARE INFORMATION
Hand wash using a mild dishwashing soap and soft
sponge, then allow the fabric to completely air dry. To
prevent mold or mildew do not store wet or damp.
WARNING:
Keep all flame and heat away from tent and tent fabric.
This tent meets flammability requirements of CPIA -84 .
THIS TENT IS NOT FIRE PROOF.
IF LEFT IN OPEN FLAME THE TENT WILL BURN.
CAUTION:
This product was not designed to be left out in the sunlight
for extended periods of time. Prolonged UV exposure will
rapidly break down the fabric of this product. UV damage
is not covered under our warranty
WARNING :
NEVER LEAVE CHILDREN UNATTENDED.
WINDY CONDITIONS MAY UPROOT THE TENT.
ALWAYS STAKE DOWN TENT.
ADULT SUPERVISION REQUIRED.
AGES 3 AND UP RECOMMENDED.
CAUTION:
Never use any fuel-burning or oxygen-consuming
devices, or any devices that produce fumes, including
stoves, lanterns, candles, hibachis or heaters in or
around your tent. This can result in carbon monoxide
poisoning, injury or death
Manufactured in China for
Gigatent
55 Haul Rd
Wayne, New Jersey 07470
www.gigatent.com
1-877-836-8701
TO VIEW FULL SELECTION OF OUR
PLAY TENT PRODUCT LINE,
GO TO WWW. GIGATENT.COM
For questions or concerns call Gigatent at our Toll Free Number: 877-836-8701
Monday-Thursday 9am-5pm EST, Friday 9am-12pm EST
or email us at [e-mail]
For replacement parts login to gigatent.com/replacements
Owner’s Manual
MODEL # CT032T/ CT032D Dream House
ASSEMBLY INSTRUCTIONS
DESCRIPTION QTY.
TENT
100% Polyester 1
POLES
Fiberglass Pole; Black 5
MATTRESS COVER
Poly/Cotton Blend 1
STEP 1:
Confirm product contents by emptying contents of bag(s) and confirming
all parts are included and undamaged.
STEP 2:
Place mattress cover over mattress with Velcro up. (figure A)
STEP 3:
Extend poles and place in position ready for installation.
STEP 4:
Take one of the poles shaped like a V and starting at the corner carefully
push it through the YELLOW pole sleeve (figure B) until it comes out of
the other end. Repeat for other V pole and insert all pole ends into black
pole pockets on the corner of tent. (figure C)
STEP 5:
There are three short straight poles that span from the front to the back at
the bends in the main poles. Find RED pole sleeves and insert each pole
through the red sleeves. (figure D) Insert the ends into the black pole
pockets (figure E) located on both ends.
STEP 6:
Place the tent onto the bed and line up the tent with the Velcro on the
mattress cover and make sure they are attached.