ST001 The Stinky Pete 4’ x 4’ x 84’’(H)
Fiberglass Pole X8 Steel Pole { { X2 X4 E 1) 2) 3) 4) 5) spread the tent body on the ground fully open all poles thread poles thru poles sleeves atop of tent (figure A) insert all pole ends into hubs (figure B) insert one end of steel poles into hubs and the other ends insert pin into bottom of poles (figure C) 6) tie the tent to the top with the rope (figure E) 7) tie the ropes to poles 8) stake the tent down 321 99 EA PENDING 145 o PAT G-KOR 9 87 P.H.
9) attach Velcro to poles (figure F) 10)hook corners of fly to the bottom of the tent to the metal rings (figure G) INSIDE F G Step "3" extra stability 11) In windy conditions use the extra ropes and stakes for more stability (figure H) H 100cm
MODEL ST001 4 P/string Fiberglass Pole Steel Pole 4 Plastic Peg 7.
Troubleshooting Guide
