User's Guide

2.5. Tag Data!
!
Click “Start” to begin scanning/inventory of the RFID Tags. The following will be
displayed on the screen when scanning/inventory is in process:
(1) Total Quantity - displayed on the middle area
(2) EPC in HEX - Electronic Product Code of the RFID Tag
(3) EPC in ASCII - If written using the RU224 ReaderTool, ASCII equivalent of the EPC
HEX will be displayed.
(4) Read Count - The number of times a Tag is scanned during the inventory period.
(5) Read Time - The Date/Time the Tag was last scanned.
(6) Read Frequency - The Frequency when the Tag was last scanned.
(7) Read Antenna - Indicates which Antenna Port the Tag was last scanned.!
You can restart the scanning/inventory by clicking the “Reset” button.!
*Settings will be saved when you close the ReaderTool."
Page ! of !33 39