User's Guide

Introduction to RU224
The RU224 is part of the Next Generation UHF RFID Reader Series from Scannel. It is
developed using the best high performance hardware technology in order to quickly adapt
with the fast-evolving technological advances in the age of Internet of Things / Industrial
Internet of Things.
Using UHF RFID Technology has never been easier with RU224 integrated with a Linux-
based micro-computer and high performance R2000 UHF RFID Chip. The device offers a
long read range with the capability of reading multiple tags at fast speeds using its four(4)
antenna ports. It complies with EPC Global UHF Class 1 Gen 2 / ISO18000-6C and
ISO18000-6B. With advanced heat sink casing design, overheating is prevented when it is at
maximum performance. It has built-in multiple connectivity (WiFi, BLE, and TCP/IP) and self-
powered GPIO to simplify installation and deployment in various applications.
RU224 RFID Reader (referred to hereafter as “Reader/reader”) is suitable for RFID
applications in supply chain management, logistics inventory management, cargo tracking
management, warehouse management, shop floor management, class management, etc.
For more information, kindly visit: www.scannel.net or email us at [e-mail]
Getting Started
Hardware and Software required for configuration and application of the RU224 are as
follows:
1. Hardware:
1.1. RU224 UHF RFID Reader
1.2. HDMI Cable (Full Size Type A)
1.3. UHF RFID Antenna with TNC Male Connector to SMA
1.4. Power Adapter (12V / 3A)
1.5. Optional: Input/Output devices such as LED Indicator Lights, Sensors, Switches,
etc.
2. Software:
2.1. RU224 ReaderTool V1.0
Page ! of !8 39