User's Manual

13
4.6 System status display
Normal working state:
When the time recorder is ready to read a RFID card, it shows its current date and time, week day,
Ethernet link, attendant record memory status and event icons as the screen below. The shift number
will be displayed only if it is set from ‘01’ to ‘99’.
Network Status Icons:
: Ethernet link works normally and has got IP address successfully.
: Ethernet link is disconnected.
: Ethernet linked is connected but not able to get IP address.
Each of the icons is a 17(width)*16(height) BMP file and it can be replaced by TR320 Utility.
RFID card reading memory occupation status icons:
: Memory occupation is below 1/3 of the total space.
: Memory occupation has reached 1/3 and below 2/3 of the total space.
: Memory occupation has reach 2/3 of the total space but not yet full.
: Memory occupation is full.
Each of the icons is a 13(width)*8(height) BMP file and it can be replaced by TR320 Utility.
Shift Icon:
: The shift number will be shown only when the shift is set except 00, .i.e. from 01 to 99.
Card reading logging state icons:
: IN
: OUT
: BREAK IN
: BREAK OUT
When the icon is highlighted, the carding reading will be recorded with the selected logging state. Each
of the icons is a 24(width)*16(height) BMP file and it can be replaced by TR320 Utility.