User's Manual

WBR800

http://www.gigatms.com.tw

Operational Description

1. Powered by Battery

For normal use, the unit is powered by battery. Push the Power Switch Button

for

about 3 seconds to turn on the unit. Also push the Power Switch Button for about 3 seconds

to turn off the unit. After the unit is turned on, the power would be turned off automatically if

there is no scanning a card within 10 seconds. This means the unit would be turned off if no

scanning a card again within every 10 seconds after every card scanning. It would have

Low Battery Detect/Warning indication when the unit is powered by battery.

2. Powered by Cable

When the unit is connected with the PC through the communication Cable

(WAS-T0675-R) and the PC is running WBR800 software and open the USB for the unit,

then the unit will be turned on in about 0.5 second by the PC through the USB PORT. Then

you can do the unit Setting and Configuration. When the software closes the USB PORT or

exits, the power is turned off from the PC immediately. When powered by cable from PC,

the Power Switch would have no function and the unit would have no Low Battery

Detect/Warning function.

3. Low Battery Detecting

When powered by battery, it would have Low Battery Detecting function. When the

battery goes low, the Power LED would flash green once every 1 second and you must

charge battery immediately, otherwise, the unit would shut down any time without

pre-warning.

4. Charge Mode

Low battery charge mode is when the WBR800 is connected to USB or Power adapter,

the battery hits low voltage and it starts to be charged automatically.

5. Charge Status Indication

When WBR800 in the charge, Battery Status Indicating light turns to yellow, it means

the battery is in charge status. When Battery Status Indicating light turns to off, it means the

charge is finished.

6. Firmware Management mode (FMM)

FMM allows you to quickly upgrade your WBR800's internal firmware via USB port and

also to check validity of currently loaded firmware. Contact your dealer for most recent

firmware upgrade files.