Owner's Manual

- 10 -
GH-PCU32-VH
English
Figure 1
Place the LGA775RM onto the LGA775 motherboard so that
side A is parallel with ARM and side B is parallel with CAM.
Figure 2
From the underside of the motherboard, use screws (4) and
plastic washers (4) together to secure the LGA775RM into
place..
Installation Instructions for P4 LGA775RM & Cooler
Figure 1
Figure 2
Figure3- 1
Figure3-2
Figure3-3
Figure 3
Gently push down on the cooler unit to lock it into
position. (Figure3-1).Connect the yellow 3-pin
connector cable of the cooler to the CPU fan
connector located on the motherboard. (Figure 3-2).
Installation is now complete.(Figure 3-3).
Note: About P4 Clips installation, please refer to
“Installation Instructions for Intel
®
Pentium
®
4 mPGA478Clips”
Side A
Side B
ARM
CAM
Plastic
Washers
Please add an adequate layer of heat sink
paste on the surface of the CPU.
To install GH-PCU32-VH on LGA775
motherboard needs both LGA775 RM & P4
clips(LGA775).