Owner's Manual

- 11 -
GH-PCU32-VH
English
Installation Instructions for Intel
®
Pentium
®
4 mPGA478 Clips
Figure 1
Please add an adequate layer of heat sink paste on the surface
of the CPU.
Figure 2
Figure showing the correct installation of the cooler atop the
CPU.
Figure 3
Hook the clip on one end of the cooler with the insert space at
the CPU base (as seeing left Figure 3).Firmly push downwards
to clip the cooler end in place. Do the same for the other clip of
the cooler to secure cooler in place.
Figure 1
Figure 2
Figure 3
Figure 4
Figure 4
Connect the yellow 3-pin connector cable of the cooler to the
CPU fan connector located on the motherboard.
Clips Installation is now complete.
Note: Please refer to page 13 & 14 for power installation
and installation of the fan speed controller.