Owner's Manual

- 12 -
GH-PCU32-VH
English
Figure 1
Figure 2
Figure 3
Figure 4
Figure 1
Please add an adequate layer of heat sink paste on the surface
of the CPU.
Figure 2
Figure showing the correct installation of the cooler atop the
CPU.
Figure 3
Align the three insert spaces of the clip with the three juts on the
CPU socket and then push firmly downwards to hold the clip in
space.If AM2, only need to hook up the middle of protuberant
point.
Figure 4
Push the lever on the side of the cooler towards the lever
position on the base of the CPU to secure the cooler atop
the CPU. Connect the yellow 3-pin connector cable of the
cooler to the CPU fan connector located on the
mtherboard. Clip Installation is now complete.
Note: Please refer to page 13 & 14 for power
installation and installation of the fan speed
controller.
Installation Instructions for AMD AM2 (940) / K8 Clip