Owner's Manual

- 13 -
GH-PCU32-VH
English
Figure 1-1
Figure 1
Connect the power cable of the power supply to the end of the
4-pin connector cable provided.
Figure 2-1
Figure 2
Connect the other end of the 4-pin connector cable to the PCB
4-pin connector on the cooler (Figure 2-2).
Figure 3
Securely hold the 3.5” fan speed controller bracket in place with
the screws provided(Figure 3-1). Connect the 3-pin connector
cable of the controller to the PCB 3-pin connector on the cooler.
(Figure 3-2)
Figure 4
Installation is complete.
Power Installation and 3.5” Fan Speed Controller Installation
Figure 3-1
Figure 4
Figure 1-2
Figure 2-2
Figure 3-2