Technology Computer Hardware User Manual

- 26 -
7VT600-RZ Series Motherboard
English
Integrated Peripherals
" * " For 7VT600-RZ-C only.
OnChip IDE Channel0 [Enabled]
OnChip IDE Channel1 [Enabled]
AC97 Audio [Auto]
VIA Onboard LAN * [Enabled]
USB 1.1 Controller [Enabled]
USB 2.0 Controller [Enabled]
USB Keyboard Support [Disabled]
USB Mouse Support [Disabled]
VIA LAN Boot ROM * [Disabled]
Onboard Serial Port 1 [3F8/IRQ4]
Onboard Serial Port 2 [2F8/IRQ3]
Onboard Parallel Port [378/IRQ7]
UART Mode Select [Normal]
Parallel Port Mode [SPP]
Game Port Address [201]
Midi Port Address [330]
Midi Port IRQ 10
Item Help
Menu Level u
CMOS Setup Utility-Copyright (C) 1984-2003 Award Software
Integrated Peripherals
higf: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Save Default F7: Optimized Defaults
F OnChip IDE Channel0
MWhen enabled, allows you to use the onboard primary PCI IDE. If a hard disk controller card is
used, set at Disabled.
8Enabled Enable onboard 1st channel IDE port. (Default value)
8Disabled Disable onboard 1st channel IDE port.
F OnChip IDE Channel1
MWhen enabled, allows you to use the onboard secondary PCI IDE. If a hard disk controller card
is used, set at Disabled.
8Enabled Enable onboard 2nd channel IDE port. (Default value)
8Disabled Disable onboard 2nd channel IDE port.
F AC97 Audio
8Enabled BIOS will automatically detect onboard AC97 Audio. (Default value)
8Disabled Disabled AC97 Audio.
F VIA Onboard LAN *
8Enabled Enable VIA Onboard LAN function. (Default value)
8Disabled Disable this function.
F USB 1.1 Controller
MDisable this option if you are not using the onboard USB feature.
8Enabled Enabled USB Controller. (Default value)
8Disabled Disabled USB Controller.
F USB 2.0 Controller
MDisable this option if you are not using the onboard USB 2.0 feature.
8Enabled Enabled USB 2.0 Controller. (Default value)
8Disabled Disabled USB 2.0 Controller.