User`s manual

GV-R7032T/GV-R7064T Graphics Accelerator - 8 -
English
4. Locate the AGP slot. If necessary, remove
the metal cover from this slot; then align your
graphics card with the AGP slot, and press it
in firmly until the card is fully eated.
AGP Slot
Graphics card
5. Replace the screw to fasten the card in place,
and replace the computer cover.
6. Plug the display cable into your card; then
turn on the computer and monitor. If your
Graphics card came with a DVI connector,
you can connect a flat panel display to the
appropriate connector, as shown below...
You are now ready to proceed with the installation of the Graphics card driver. For detailed
instructions, select your operating system from the list below.
To TV or VCR
To VGA Monitor