User`s manual

Software Installation- 9 -
English
3.SOFTWARE INSTALLATION
In this manual, we assume that your CD-ROM Drive letter to be Drive D:
Picture below are shown in Windows XP
3.1. WINDOWS
®
98 /98SE or WINDOWS ME /WINDOWS 2000 or
WINDOWS XP DRIVER AND UTILITIES INSTALLATION
The installation of Win 98/98SE / Win ME / Win XP drivers is very simple.
When you insert the driver CD into your CD-ROM drive, you can see the AUTORUN
window (if it does not show up, run "D:\setup.exe"). Then you can follow guides to setup
your GV-R7032T/GV-R7064T driver (Please follow the subsection 3.1.3 "Step By Step
Installation" to install the driver for your GV-R7032T/GV-R7064T graphics accelerator.
3.1.1.Operating system requirement
l If your OS is Microsoft Windows, when loading the GV-R7032T/GV-R7064T drivers for
the system, please make sure your system ( Win 98/98SE or Win ME / Win2000 / Win
XP) has installed DirectX or later.
l If you install the GV-R7032T/GV-R7064T drivers for the mainboard, which
consist of SIS, ALI or VIA chipsets, please install the appropriate Driver program for
that mainboard. Or please contact your motherboard nearest dealer for M/B Diver.