Installation Manual

Before installing the devices, be sure to turn off the devices and your computer. Unplug the power

cord from the power outlet to prevent damage to the devices.

8) LED_C1/LED_C2 (RGB LED Strip Headers)

The headers can be used to connect a standard 5050 RGB LED strip (12V/G/R/B), with maximum power

rating of 2A (12V) and maximum length of 2m.

Pin No. Denition

1 12V

2 G

3 R

4 B

For how to turn on/off the lights of the LED strip please visit the "Unique Features" webpage of

GIGABYTE's website.

1 1

LED_C1 LED_C2

G.QBOFM

9) SATA3 0/1/2/3 (SATA 6Gb/s Connectors)

The SATA connectors conform to SATA 6Gb/s standard and are compatible with SATA 3Gb/s and SATA

1.5Gb/s standard. Each SATA connector supports a single SATA device. The SATA connectors support

RAID 0, RAID 1, and RAID 10. Refer to Chapter 3, "Conguring a RAID Set," for instructions on conguring

a RAID array.

Pin No. Denition

1 GND

2 TXP

3 TXN

4 GND

5 RXN

6 RXP

7 GND

SATA3

G.QBOFM

1 7

SATA3

3 2

Connect your RGB LED strip to the header. The power pin (marked

with a triangle on the plug) of the LED strip must be connected to

Pin 1 (12V) of this header. Incorrect connection may lead to the

damage of the LED strip.

RGB LED Strip

12V

- 17 -